Truck-Lite
- Signal Stat Full Circle Pattern
- 24 Red LED Diodes
- 3 Prong Plug
- SAE PC rated for combination clearance/marker applications
- Electronics completely sealed in epoxy to resist corrosion & moisture
Cab Light Base Gasket | Part Number: 97046
Black epoxy painted heavy gauge steel
3" ROUND STICK ON REFLECTOR
- Signal-Stat
- LED 4 Diode
- Marker Clearance Light
- P2
- Reflectorized
- PL-10
- 12V
- 26 Series
- Incandescent
- Yellow Beehive
- 1 Bulb
- Silver Rubber
- 2 Screw
- 12V
- Kit
Signal-Stat, Red/White Reflective Tape, 2 in.
Sold by the foot. Full roll 150'.
- Grommet cover features chrome plated plastics to enhance appearance of lamps
- Flange cover provides improved theft resistance of LED lamps
- Two screws required
- Yellow 2 /12" Round
- 4 Diode LED
- P2
- Reflectorized
- PL-10
- 12V
- Super 44 LED
- Yellow Round
- 42 Diode
- Rear Turn Signal, Black Grommet Mount, Fit 'N Forget S.S., Straight PL-3 Female
- 12V
16 diode double bullseye LED pattern
- Red Rectangular
- 16 Diode
- 2 Screw
- Hardwired
- 12V
Features stop, turn, tail, clearance, back-up and license functions; three stud mounting design with ground function
Narrow Rail, 12" x 1" Rectangle, Clear, Reflector, 2 Screw or Adhesive Mount
- Super 60, Incandescent
- Yellow Oval
- 1 Bulb
- Front/Park/Turn
- 12V
- Mount horizontally or vertically
- Right angle plug assembly
- Super 21
- Incandescent
- Red Rectangular
- 2 Screw
- Super 21 Plug
- .180 Bullet Terminal, 12V, Kit
Hardwired lamp design is easily retrofitted, with only a 1-3/16'' mounting hole required for grommet installation.
12V voltage
30 Series, Incandescent, Red Beehive, 1 Bulb, Marker Clearance Light, PC, PL-10, 12V
Features a beehive lens designed for cab marker use
Lens and housing are sonically sealed
High-impact polycarbonate construction
12V, 15,000-hour-rated bulb
Suitable for PC requirements on a 45-degree angle
Lens and housing are sonically sealed
High-impact polycarbonate construction
12V, 15,000-hour-rated bulb life
Closed Back, Black PVC, Grommet for 30 Series and 2 in. Lights, Round, PL-10, Stripped End/Ring Terminal, Kit
Signal-Stat, LED, Yellow Rectangular, 3 Diode, Marker Clearance Light, P2, PL-10, 12V
- Popular on owner/operator and show trucks.
- Standard connection.
- 2 Diode (red), 3 diode (yellow) LED pattern.
- Encapsulated electronics prevent damage from moisture and corrosion.
- Not suitable for PC requirements.
- Permanent adhesive backing
- Mounts on any clean flat surface
- Smaller diameter for applications where space is limited
High-impact plastic mount
Design allows surface mounting of 2" diameter lamps
Meets PC requirements on a 45-degree angle using LED or incandescent PC-rated/combination lamp
- 14 Series
- Incandescent
- Yellow Rectangular
- 1 Bulb
- Marker Clearance Light
- P2
- Reflectorized
- PL-10
- 12V
- Acrylic lens
- Mounts with adhesive backing or screws
- 26 Series
- Incandescent,
- 1 Bulb
- Marker Clearance Light
- Black Rubber 2 Screw
- Socket Assembly
- 12V
- Acrylic lens
- Replaces Do-Ray and Betts Lamp
- Hardwired allowing alternating flashing of up to 20 LED lamps (10 lamps per side)
- Features color coded wires, epoxy sealed circuitry and installation instructions
- Operates on 12V or 24V systems
- Maximum 5 amp load
- Flashes 3 times per 1/2 second
- Features rugged stainless steel
- ID bar designed to fit in limited mounting areas
- Lamps are mounted on 6" centers
- Direct replacement for Ford
- Fits in most narrow header rails
- Snap-lock tabs allow easy installation
- Upgrade to Truck-Lite LED lighting systems using 15 Series products
Features snap-in lens, Rubber housing provides additional protection against shock and vibration
- 26 Series
- Incandescent
- Red Oval
- 2 Bulb
- Marker Clearance Light
- P2
- Black Rubber 2 Screw
- Hardwired
- Stripped End
- 12V
- 15 Series
- Rail Mount
- Incandescent
- Yellow Rectangular
- 1 Bulb
- Marker Clearance Light
- PC2
- White ABS Bracket Mount
- PL-10
- Ring Terminal/Stripped End
- 12V
- Kit
- Durable synthetic rubber housing resists corrosion
- Includes mounting hardware
- Universal mount uses one 5/16"-18 stud
- Signal-Stat 8 Diode LED
- Clear/Red Rectangular
- Marker Clearance Light
- P2
- 2 Screw
- Hardwired, Stripped End
- 12V
- Convex glass with no distortion
- Does not meet FMVSS 111 requirements for West Coast Mirrors
- Use for added safety on off-highway equipment
- Fits 5/8'' OD mirror tubes
- Black ABS plastic housing
- Includes mounting clamp which tightens onto mirror tube with one screw
|
- Flush mounts the 60 Series lamps
- Provides lamps with additional shock absorbency to extend lamp life
- TPR grommet designed for extreme environmental applications and eliminates outgassing
- Semi-closed back recommended for incandescent lamps to protect lamp and wiring while allowing heat to escape
- Closed back recommended for LED products only and protects against corrosion and stone damage