Truck-Lite
- Signal Stat Full Circle Pattern
- 24 Red LED Diodes
- 3 Prong Plug
Cab Light Base Gasket | Part Number: 97046
Narrow Rail, 12" x 1" Rectangle, Clear, Reflector, 2 Screw or Adhesive Mount
3" ROUND STICK ON REFLECTOR
- Grommet cover features chrome plated plastics to enhance appearance of lamps
- Flange cover provides improved theft resistance of LED lamps
- Two screws required
- Super 60, Incandescent
- Yellow Oval
- 1 Bulb
- Front/Park/Turn
- 12V
- Mount horizontally or vertically
- Right angle plug assembly
- 26 Series
- Incandescent,
- 1 Bulb
- Marker Clearance Light
- Black Rubber 2 Screw
- Socket Assembly
- 12V
- SAE PC rated for combination clearance/marker applications
- Electronics completely sealed in epoxy to resist corrosion & moisture
Black epoxy painted heavy gauge steel
- Acrylic lens
- Replaces Do-Ray and Betts Lamp
Features stop, turn, tail, clearance, back-up and license functions; three stud mounting design with ground function
30 Series, Incandescent, Red Beehive, 1 Bulb, Marker Clearance Light, PC, PL-10, 12V
Features a beehive lens designed for cab marker use
Lens and housing are sonically sealed
High-impact polycarbonate construction
12V, 15,000-hour-rated bulb
Suitable for PC requirements on a 45-degree angle
Signal-Stat, LED, Yellow Rectangular, 3 Diode, Marker Clearance Light, P2, PL-10, 12V
- Popular on owner/operator and show trucks.
- Standard connection.
- 2 Diode (red), 3 diode (yellow) LED pattern.
- Encapsulated electronics prevent damage from moisture and corrosion.
- Not suitable for PC requirements.
- Permanent adhesive backing
- Mounts on any clean flat surface
- Smaller diameter for applications where space is limited
- Hardwired allowing alternating flashing of up to 20 LED lamps (10 lamps per side)
- Features color coded wires, epoxy sealed circuitry and installation instructions
- Operates on 12V or 24V systems
- Maximum 5 amp load
- Flashes 3 times per 1/2 second
High-impact plastic mount
Design allows surface mounting of 2" diameter lamps
Meets PC requirements on a 45-degree angle using LED or incandescent PC-rated/combination lamp
- Features rugged stainless steel
- ID bar designed to fit in limited mounting areas
- Lamps are mounted on 6" centers
- Direct replacement for Ford
- Fits in most narrow header rails
- Snap-lock tabs allow easy installation
- Upgrade to Truck-Lite LED lighting systems using 15 Series products
Closed Back, Black PVC, Grommet for 30 Series and 2 in. Lights, Round, PL-10, Stripped End/Ring Terminal, Kit
Features snap-in lens, Rubber housing provides additional protection against shock and vibration
- 26 Series
- Incandescent
- Red Oval
- 2 Bulb
- Marker Clearance Light
- P2
- Black Rubber 2 Screw
- Hardwired
- Stripped End
- 12V
- 15 Series
- Rail Mount
- Incandescent
- Yellow Rectangular
- 1 Bulb
- Marker Clearance Light
- PC2
- White ABS Bracket Mount
- PL-10
- Ring Terminal/Stripped End
- 12V
- Kit
- 14 Series
- Incandescent
- Yellow Rectangular
- 1 Bulb
- Marker Clearance Light
- P2
- Reflectorized
- PL-10
- 12V
- Yellow 2 /12" Round
- 4 Diode LED
- P2
- Reflectorized
- PL-10
- 12V
- Durable synthetic rubber housing resists corrosion
- Includes mounting hardware
- Universal mount uses one 5/16"-18 stud
- Signal-Stat 8 Diode LED
- Clear/Red Rectangular
- Marker Clearance Light
- P2
- 2 Screw
- Hardwired, Stripped End
- 12V
- Convex glass with no distortion
- Does not meet FMVSS 111 requirements for West Coast Mirrors
- Use for added safety on off-highway equipment
- Fits 5/8'' OD mirror tubes
- Black ABS plastic housing
- Includes mounting clamp which tightens onto mirror tube with one screw
|
- Flush mounts the 60 Series lamps
- Provides lamps with additional shock absorbency to extend lamp life
- TPR grommet designed for extreme environmental applications and eliminates outgassing
- Semi-closed back recommended for incandescent lamps to protect lamp and wiring while allowing heat to escape
- Closed back recommended for LED products only and protects against corrosion and stone damage
Designed for flush mounting 45 Series lamps
LLV grommet designed specifically for Model 45 LLV lamps mounted in plate thickness of 09" to 125"
- 30 Series
- 2 Diode
- Yellow Round
- P3
- Gray Polycarbonate Flush Mount
- Female PL-10
- 12V
- Kit
- 60 Series
- Incandescent
- Clear Oval
- 1 Bulb
- Back-Up Light
- Black Grommet Mount
- PL-2
- Stripped End/Ring Terminal
- 12V
- Kit
- 40 Series
- Incandescent
- Clear Round
- 1 Bulb
- Back-Up Light
- Gray Flange Mount
- PL-2
- Stripped End/Ring Terminal
- 12V
- Kit
- 19 Series
- Base Mount
- Red Rectangular
- 1 Diode
- P2
- Gray Polycarbonate Bracket Mount
- Hardwired
- Stripped End
- 12V, Kit
- 26 Diode for Auxiliary Turn Lamps and 25 Diode for Sequential Arrow Lamps
- Auxiliary turn is a two function lamp and compiles with SAE 592e and 2042 on both functions|Use part# 60315Y for LED Side Turn applications SAE J2039
- Sequential arrow is to be used as an auxiliary lamp only and requires a 50% on time flasher, part #97231
- Not suitable for ''stand alone'' front or rear turn applications
- Electronics completely sealed in epoxy to resist corrosion and moisture
- Die Cast
- Incandescent
- Round,
- 1 Bulb
- Chrome Flange Mount
- Hardwired- Stripped end
- 12V
- Signal-Stat
- LED 4 Diode
- Marker Clearance Light
- P2
- Reflectorized
- PL-10
- 12V
- Signal-Stat
- Tab
- 40 AMP
- 12V
- Heavy Duty Relay
- Polycarbonate Housing
- 5 Blade Terminal
These relays replace both Hella and Bosch units
- 19 Series
- Radius Base Mount
- 19 Series Products
- Used In Rectangular Shape Lights
- Gray Polycarbonate
- 2 Screw Bracket Mount
- Super 45
- Reflectorized
- Incandescent
- Clear Rectangular
- 1 Bulb
- Back-Up Light
- PL-2
- 12V
- Marker Clearance Plug
- 16 Gauge GPT Wire
- PL-10
- Stripped End/Ring Terminal
- 18 in.