Grand General
4" Red LED Load Light with Red Lens
- 4-1/8" Dia. x 7/8" (H)
- Polycarbonate lens, reflector and housing sonically sealed
- Fits OE stock load light housing behind cab/sleeper 3 mounting screw holes
- 24 LEDs - 12V
- Plug-in #1156 female plug
Chrome Window Crank Square Adapter
Fits Peterbilt, Kenworth and International
Kenworth Large Chrome Gauge Bezel
- Installation: Snaps On
- Gauge Type: Speed/Tachometer
- 5 ⅜” dia.
- Light amber glass lens with sponge gasket
- Stainless steel screw & soft plastic washer
High quality aftermarket accessory for Peterbilt, Kenworth, and Freightliners. This dual headlight cover is made with show quality chrome ABS plastic and now features dual function LED lights that can be used as turn signals.
16 1/8" ( L) x 3 3/8" (W) x 6 7/8" (H)
Chrome steel with plastic turn knobs
LED DUAL RECTANGULAR HEADLIGHT BEZEL WITH VISOR
Size | 16 1/8" ( L) x 3 3/8" (W) x 6 7/8" (H) |
Material | Chrome ABS plastic |
Fits | Dual headlight (FL, KW and PB models) |
Installation | Direct replacement, 3 wires |
Stainless Steel Light Bracket
Size: 4-3/4" x 4-5/8" x 7-1/2”
Replacement lens for Cab Marker Lights
Stainless steel lens guard for thin line LED marker lights
- Size: 4-½” (L) x 1-5/32” (W) x 1-3/32” (H)
Standard Chrome Steel Lug Nut Cover for Ford Hub Pilot Wheels and Mercedes
- Width:32mm
- Height: 2-3/8"
Size: 8 5/16" (L) x 4 15/16" (W) x 8 ½" (H)
Material: Chrome Die Cast
Axle covers hi hat: 2 pc hi hat for standard 10 1.5" lug nut rear dual aluminum wheel. Used on most drivers with aluminum wheels, not for newer hub piloted wheels (see e-1250 for hub piloted 33mm.)
- Size- 9-1/2" (H), Fits- 20", 22.5", and 24.5" wheel
- Ring holes- 5 large/ 5 small, Wheel type- aluminum
Axle covers hi hat: 2 pc hi hat for standard 10 1.5" lug nut rear dual steel wheel. Used on most drivers with steel wheels, not for newer hub piloted wheels (see e-1250 for hub piloted 33mm.)
- Size- 9-1/2" (H), Fits- 20", 22.5", and 24.5" wheel
- Ring holes- 5 large/ 5 small, Wheel type- Steel
- Fits 20, 22. 5 and 24. 5 wheels with 10 lug holes
- Needs m9000 lug nut tool.
Includes:
- 1 - high hat (40148)
- 1 - removable cap (40139)
- 10 - lug nut covers
- 1 - clear plastic rim protector
16" Mud Flap Weights
- 3" x 16"
- 11.5 gauge - chrome steel 14 gauge
- Without Backing Plate
- Mounting hardware is included
Lugnut covers body/frame: 5/8" standard chrome bolt cover
- Push On Syle
- 3/4" Height
- 5/8" Wide
- Used on many frame bolts.
Chrome Axle Cover
- OEM style edge
- 8 ½” dia. axle
- 8 of ¾” studs, thinner lip
- Fits International
Chrome steel horn cover: round horn cover for 6.5 inch to 7 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
- Center hose: 5/8" diameter
- Arbor hole: 1/2" diameter
- Set Contains
- 2 pcs. of 4" round plates
- 1 pc. of threaded stem with nut
- 1 pc. of nylon pipe
Axle covers hi hat: 3 pc hi hat for hub piloted/33mm 10 lug rear dual steel and aluminum wheels using 33mm. Used on wet axles.
- Material: 19 Gauge Steel — high hat 15 Gauge Steel — ring
- Size: 10-1/2" (H)
- Fits: 20", 22.5", and 24.5" wheel
- Ring Holes: 5 large, 5 small
- Wheel Type: Aluminum
- ID: 7-1/4"
- Overall Height: 2-3/4"
- Fits: 7-1/4" dia. axle, 12 of 1/2" studs
- Push On Style
- Chrome Plated Steel
- Width: 1/2"
- Height: 11/16"
Used on many frame bolts.
BOTTOM MUD FLAP PLATE WITH 3 HOLES
- 11.5 Gauge - Stainless Steel
- Without Backing Plate
- Size: 4" X 24"
- SOLD BY EACH
3/4" standard Push on bolt cover. Used on bumper and frame bolts.
- Chrome plated steel
- Across Flat: 3/4"
- Height: 11/16"
- Red LEDs
- Clear Lens
- Function: Marker & Clearance
- Wire connection: uses standard 2-prong pigtail
- Design with sealed Polycarbonate lens and housing to prevent damage from moisture and corrosion
- Amber Lens
- 24 super bright amber LEDs with amber lens and Pearl style reflector design for superior light distribution
- Fits the OE stock load light housing located behind the cab/sleeper; Plug-in #1156 female plug
- High impact polycarbonate lens and housing are sonically sealed to prevent damage from moisture and corrosion
- 12 volts, low ampere draw, sold as each
12" Ultra Thin Red LED with Clear Lens and Bezel
- Marker & Clearance
- 2 wires, hardwired with ground ring
- Tape/adhesive not included w/ bezel
- Surface mount
- Red Silicone Bulb Cover
- Bulb No. 1156, No. 1157 and other large size bulbs
Size: 4-1/2" (L) x 1" (W) x 1/2" (H)
Input: 24V DC
Output: 12V DC
Maximum: 1AMP load
- Chrome Plated Steel
- Large - 19" (H) x 3" (W)
- Studs on Back
3.5" Purple Glass Watermelon Lens