Grand General
4″ PEARL LED LOAD LIGHT
- 4-1/8" Dia. x 7/8" (H)
- Polycarbonate lens, reflector and housing sonically sealed
- Fits OE stock load light housing behind cab/sleeper 3 mounting screw holes
- Green 24 LED's - 12V
- Clear Lens
- Designed for interior or decorative use only
Side A: Yellow LED's/Yellow Lens
Side B: Red LED's/Red Lens
- 24 LEDs per side - 12V
- Light size: 4-1/4" dia x 2-1/2"(W)
- Stud size: 20 thread, 1/2" dia. x 1-11/16” long
- Chrome die cast housing, acrylic lens
- Wire Connection
- Dual high/low functions with 2 wires and stud as the ground
- 24 Red LEDs - 12V
- Clear Lens
- Light Size: 6-1/2"(L) x 2-5/16"(W) x 1-1/2”(H)
- Sealed polycarbonate lens, reflector and housing
- Wire Connection
- Uses standard 3-prong pigtail
CLASSIC WATERMELON SURFACE MOUNT LED LIGHT TURN/MARKER LIGHT
- Green Light
- Green Lens
Flush mount lights are popular due to easy installation and versatile placement such as bumpers, air cleaners, marker lights and interior dome lights. Grand General is proud to introduce the LED upgrade of the classic watermelon style lens. This new "Old School” surface mount LED features 18 high powered SMD diodes, stainless steel bezel and high & low dual functions in 10 different colors for custom applications.
LED | 18 High Power SMD LEDs - 12V |
Size | 3-7/16” dia. x 2-5/8" (H) |
Features | Easy surface mount design |
Material | Sealed polycarbonate lens with stainless steel bezel |
Installation | 12" lead hardwired with three 0.180 bullet plugs |
Does not meet DOT specs. Designed for interior or decorative use only.
3" Stainless Steel Pedestal Light Extension
- Chrome aluminum pedestal extension with stainless steel wrap and stainless steel mirror clip
- Fits: Grand General pedestal lights 78360 (4" round) series & 75190 (3" round) series
- Size: 3" (L) x 1-3/16" dia.
4" Pearl Red LED Light with Chrome Die Cast
- Chrome die cast housing with 3 mounting holes
- Function: Stop/Turn/Tail Light
- Light hardwired w/ 2 prong plug
- 12 volts; low ampere draw
5-3/4 Stainless Steel Headlight Visor
- Highly polished stainless steel
- Safety design with front lip turned under to prevent cuts on sharp edges
- 6 Amber LEDs - 12V
- Clear Lens
- Size: 3-15/16” (L) x 3/4” (W) x 15/16” (H)
- Ideal for narrow body channel mounting
- Black rubber gasket included
- Sealed polycarbonate lens and housing
- Hardwired with two wires and ground ring Surface mount
Driver Information Computer Control Knob With base
- Designed for Peterbilt 2006 and later
- Quality chromed plastic for polished shine
- Highlights the small details that make your truck unique
- Sold as each
- 15 Amber LEDs - 12V
- Amber Lens
- Chrome Plastic Bezel
- Size:
- Light: 12” (L) x 9/16” (W) x 1/4” (H)
- Bezel: 12-1/4” (L) x 1-1/16” (W) x 3/8" (H)
- 2 wires, hardwired with ground ring
- Tape/adhesive not included w/ bezel
- Surface mount
- Sealed polycarbonate Amber lens, reflector and housing
Dual Rectangular Headlight Bezel With Visor
Material: Chrome Plastic
- Heavy duty metal composite casting
- Superior chrome plated or matte black powder coated finishes
- Original style from 1940-1950s, Size- 5 3/4" (L) x 3 7/8" (W) x 6 7/8" (H)
- 2 1/2" bolt pattern, Two mounting holes. Mounting template/gasket & hardware kit included
Kenworth 06 Switch Cover Dimmer
3.5 Inch Watermelon Style Glass Lens
Lens Only
Color: Blue
- Bulb No. 9005XS
- Direct replacement - 12V
- Sold by pair
- Clear Lens
- Fits 8.5 inch diameter axle with 8 - 5/8" studs
- 8 inch inside diameter with 3 inch overall height
- 1.5 inch side wall designed for newer truck axles with longer studs
- Sold as each
11.5 gauge chrome plated steel |
Sold By Each
Stainless Steel 7” Convex Blind Spot Mirror
- Stainless Steel 7" Convex blind spot mirror for trucks, buses, utility vehicles and more
- Helps to improve visibility and eliminate blind spots
- Comes with high quality Stainless Steel housing to give it the finishing touch
- 5/16" Female adjustable ball stud for view angle rearrangement and the heavy duty "l-shape" bracket for easy installation
STANDARD CHROME STEEL PUSH-ON LUG NUT COVER W/O FLANGE
Chrome plated steel |
Part No. | Across Flat | Height |
10153 | 7/16" | 5/8" |
Material | Chrome plastic |
Size | 3" (H) |
Fits | Most trucks with 33mm lug nuts |
15/16" Nut Cover Bullet Plastic
Height: 1 ⅞”
2 1/8" Stick On Red Reflector With Chrome Trim
- Acrylic reflector with chrome plastic trim
- Adhesive backing Mounts on clean flat surface
- Chrome Die Cast Housing
- Includes: Stainless steel bezel, glass lens and black mounting gasket
- Function: Marker/ Clearance
- 18 Gauge Wire Connection
- Size: 3-1/2” Dia. x 15” (L)
- Bulb: No. 1141, 12V, 21 CP
- Bulb Number: 9006XS
- Type: High
- 80 Wats
Across Flat: 1 1/2"
Height: 1 1/2"
- 100ft in a spool roll, 16 gauge wire, and 3 conductor/wire Copper stranded
- The parallel wires run a long side by side and never splits
- Flexible Black, Red and white PVC outer-jacket resists water, chemical, oil and abrasion; temperature range up to 105C
Bulb | No. 1141, 12V, 21 CP |
Size | 3-1/2” Dia. x 15” (L) |
Material | Chrome die cast housing and stainless steel bezel, glass lens and black mounting gasket |
Wire | 18 Gauge |
- Sealed polycarbonate lens, reflector and housing
- 4-1/8” dia. x 7/8” (H)
- Uses standard 3 prong pigtail
- Function: Stop/Turn/Tail
- Red LED
- Red Lens
4" Red/Red Smart Dynamic LED Light
- 4-5/16" Dia. x 1-1/8" (H)
- 26 LEDs - 12V
- Built-in smart chip to sense turn or stop signal
Stop function: full lit (non-sequential)
Turn function: sequential - Sealed polycarbonate lens, reflector and housing
- Adapter plug (87368) included
- Red LED
- Red Lens
- Red 24 LEDs - 12V
- Clear Lens
- Chrome die cast housing with 3 mounting holes, acrylic lens
- Light hardwired w/ 2 prong plug
- Housing wired with #1157 socket pigtail
- Fits OE stock load light housing behind cab/sleeper
- 3 mounting screw holes requires 4-1/2" dia. hole for mounting
Flush Mount 3.5" Diameter Large Glass Marker Light Kit
- Wires: No. 1157 (80306) - 12V
- For all purposes, increases your driving visibility 1 wire hole & 2 screw holes required
- Glass lens and stainless steel bezel
- 2 Wires / Dual Function
- Marker & Clearance
- Red Lens
2 1/8" Stick On Amber Reflector
- Material: Acrylic reflector with chrome plastic trim
- Installation: Adhesive backing Mounts on clean flat surface
- 1 Red High Power LED (12V)
- Red Lens
- Size
- 1-1/2" dia. overall
- 3/4" stud length and 0.625" dia.
- Bow tie lens designed for wider output
- Hardwired with three 0.180 bullet plugs
- Sealed polycarbonate Red lens with chrome plastic bezel
- Amber 13 LEDs - 12V
- 13/16" dia. x 2 3/16" (H)
- No additional adapter, base or hardware needed
Removable screw-on cover - Built-in ceramic heat sink helps to prevent overheating
- Bulb Type 3157
1/2" Female To Female Adapter
- 1/2" adaptor with standard thread
- Special designed built-in under glow light effect
- 4" LED lights with twist-on lock bezel
- 1" mini LED light wide angle bow tie lens
- Boxed end style with backing plate
- License plate frame & LED license light
- 24 Red LEDs - 12V
- Red Lens
- Function: Stop/Turn/Tail
- 5-5/16" (L) x 3-7/16" (W) x 1-1/8" (H)
- Sealed polycarbonate lens, reflector and housing
- Uses standard 3-prong pigtail
- 24 Red LEDs - 12V
- Clear Lens
- Function: Stop/Turn/Tail
- 5-5/16" (L) x 3-7/16" (W) x 1-1/8" (H)
- Sealed polycarbonate lens, reflector and housing
- Uses standard 3-prong pigtail
- 24 White LEDs - 12V
- Clear Lens
- Function: Back Up Light
- 5-5/16" (L) x 3-7/16" (W) x 1-1/8" (H)
- Sealed polycarbonate lens, reflector and housing
- Uses standard 3-prong pigtail
4-3/4" extension
1/2" adaptor standard thread
18" Red And Black Leather
Extra padding for added comfort Reinforced durable rubber lining grips onto the steering wheel and holds the cover in place Superior style and quality
- 12" Black Shift Extension
- 1/2” standard thread
- Oval Pearl Amber color LED light, with Clear lens; 24 LEDs of 12V
- Waterproof design with sealed high impact lens and housing to prevent damage from moisture and corrosion
- Wire connection- uses standard 3-prong pigtail, 3-prong pigtail GG 80472 included with kits
Cab Light Chrome Visor
- 2 side Screws
- Chrome Plastic