Fits 0.180 male bullet
Sold by the plug (~12")

• 1" long lip for aluminum wheel with 8-1/2" dia. center hole
• Fits Kenworth & Freightliner 1996

Lugnut covers body/frame: 1" standard chrome bolt cover. Used on many frame bolts.

Material: Chrome Plated Steel

1" Wide

1-1/4" Tall

Glass Flush Mount 1 Wire Dark Amber Watermelon Light

• Dark Amber Glass Lens
• Sold Individually 
• Glass lens
• Stainless steel bezel
• Function: Marker & Clearance 

• Size 1-13/16" (H)
• Fits 20", 22.5" and 24.5" wheel with 8-23/32" diameter center hole
• 7/16" short lip for steel wheel
• 4 Notches
• 4 Clips

Rear Axle Cover

• Stainless Steel
• 8 1/2in chrome rear axle cover with 3/4 studs.
• 1 inch Side Walls

Stainless steel horn cover 4 welded snap-in clips for mounting fits 4 5/8" x 7 3/8" horn bell (Fits Grover rectangular air horns)

Chrome steel horn cover: round horn cover for 7.25 inch to 7.5 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.

• 14 gauge stainless steel
• Mounting hardware included
• Bottom mud flap plate with 3 studs
• Sold by each

Concealing your open lug nuts with Grand General's lug nut covers is the easiest and most cost effective way to dramatically change the look of your vehicle. Our wide selection of covers come in many different designs to cater to the OEM look or an aggressive aftermarket style.  Made from high quality ABS plastic for a true and secure fit.

Material: Chrome Plastic

33MM across flat

3" Height

• For wheel with 8-23/32" dia. center hole
• Sold by each

• Hardware included
• Width: 24" 
• Height 2" 
• Material: 14 gauge - stainless steel
• 4 Studs on back

Stainless Steel Top Flap Weight 4 Hole 

• 14 gauge stainless steel
• 4 holes for mounting
• Mounting hardware is included
• 24 inch x 2 inch
• Sold as each

3.5 Inch Watermelon Style Glass Lens

Lens Only

Color: Red

 Amber/Red 4 " Round Double Faced Pearl 24-LED Pedestal Light with Chrome Die Cast Housing

• Polycarbonate lens and chrome die cast housing
• 3 wire connection
• 24 LEDs per side, 12V

18 LED Amber Lens/Amber Light Flush Mt Kit | Part Number : 81940

18 LED Red/Red Flush Mount Watermelon Light Kit

3.5" Dark Amber Watermelon Lens

• Size: 3 ½” dia. x 2 ⁷⁄₁₆" (H) 
• Material: Glass
• Color: Dark Amber
• Lens Only

• Glass lens and stainless steel bezel
• 1 wire hole & 2 screw holes required
• Red Lens Color

U-Shape Bracket 4 1/4" Chrome Plated Steel

• Chrome mirror/light U bracket 1-5/8 x 4-1/4 x 1-1/4"

• Ultra-thin hex style dual function interior LED light with 54 super bright diodes for versatile application
• Designed for under glow effect for air cleaners, trucks, trailers, RVs', campers and more
• Easy installation with three hardwired 0.180 bullet plugs and sturdy double-sided tape mount
• Size: 5-1/8" (L) x 5-1/8" (W); Thickness: 1/4"
• 12 Volt
• Sold Individually
• Color: Blue

Chrome Plated Steel Sit down Lady Facing Right

3" (H) x 4-1/2" (W)

Studs on back

• Gear shift extensions in 6 inches black coated steel
• 1/2” standard thread
• Length: 6"
• Black coated steel

• Four holes, 6-7/8" x 12-1/2" for standard license plate
• Chrome Plated Steel, Wide Bottom

• Chrome die cast housing and glass lens, with stainless steel bezel
• Wire connection: 1 Wire, 18 Gauge
• 3-1/2" dia. x 4-3/8" (W) x 5-1/2" (H) Stud: 20 thread, 1/2" dia., 1-11/16" long
• Bulb no. 1156, 12V

• 11” (L), 1 5/8" dia. ring
• PVC leather with metal ring
• Replaces stock pull cord/lanyard for air valve
• Color: Black

• Facing Right
• Studs on Back
• Size: 7-1/2" (H) x 9-1/2" (W)

• Door Window Switch Cover - Single Switch
• Fits Kenworth 2006
• Chrome Plastic

4 notch chrome front hub cap short lip with hub odometer hole. Included clips for mounting.

• Aluminum reflector top plates with DOT-C2 conspicuity tape
• Size- 22 inches in length when measured across, 25-1/2 inches along top edge
• Sold by Pair

Stainless Steel Mirror Clamp Fits 3/4 Inches O.D Tube, 3/8 Inches Slot

• Chrome plated steel, universal front hub cap in standard shape
• Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
• 6 notch fits all 4, 5, and 6 uneven notch hubs
• 1 inch long lip for aluminum
• Sold By Each

Size: 5" (W) x 4" (L) Overall Size

Meet DOT's annual inspection requirements. Including complying with §396.17(c)(2) with help from these labels.

Note: On vinyl labels, use indelible permanent ink that will not fade in direct sunlight.

‧Vinyl with protective laminate, 2-ply

This form provides ample room for recording identification data and component conditions. It reflects DOT record keeping criteria for annual vehicle inspections - §396.21. Also includes minimum periodic insepection standards (Appendix G to Subchapter B) on the back of the form to help reinforce DOT vehicle inspection requirements. Durable 100-lb. manila ply helps preserve report

‧3-ply with carbon

4" Stainless Steel Security Mounting Flange

• Locks light in place to help prevent theft
• Easy snap in installation
• 3 screws included
• Fits Most 4" round lights

6 Inches Rectangular Spyder Amber/Amber 8 LED Marker Light

• 8 Amber LED's 
• Amber Lens
• Specially designed to fit trailer top trail
• Sealed polycarbonate lens and housing
• 3 wires, hardwired with ground ring

• Direct replacement for Freightliner models
• Hardwired with two 0.180 bullet plugs
• 4-9/16"(L) x 2-1/4"(W) x 1-1/8"(H)
• 8 LEDs - 12V

4" Amber/Amber Smart Dynamic LED Light

• 4-5/16" Dia. x 1-1/8" (H)
• 26 LEDs - 12V
• Built-in smart chip to sense turn or stop signal
  Stop function: full lit (non-sequential)
  Turn function: sequential
• Sealed polycarbonate lens, reflector and housing
• Adapter plug (87368) included
• Amber LED's
• Amber Lens

• 24  LEDs with pearl design for superior light distribution
• High impact polycarbonate lens, housing and pearl reflector are sonically sealed to prevent damage from moisture and corrosion
• Uses standard 3-prong pigtail (not included)
• 12 volts; low ampere drawn

4″ PEARL LED LOAD LIGHT

• 4-1/8" Dia. x 7/8" (H)
• Polycarbonate lens, reflector and housing sonically sealed
• Fits OE stock load light housing behind cab/sleeper 3 mounting screw holes
• Green 24 LED's - 12V
• Clear Lens
• Designed for interior or decorative use only