Grand General
Chrome front axle cover with 4 notches for newer steel and older aluminum wheels
- Lip: 7/16"
- Notches: 4
- Clips: 4
4 notch chrome front hub cap short lip with hub odometer hole. Included clips for mounting.
Front chrome axle cover 8 23/32" 5 notch short lip hub cap. Fits Newer peterbilt/volvo/ford.
Includes clips for mounting.
- Fits 8-1/2" dia. axle, 8 of 5/8" studs, Also fits Peterbilt 1995 and later
- Size- 1" (H) side wall, Sold by each
- 8" I.D
- Chrome plated steel
- Fits Rear hub caps
- Cone shape
- 8-1/2" dia. axle, 8 of 5/8" studs, also fits "Peterbilt" 1995 up
Rear Axle Cover
- Chrome Plated Steel
- 8 1/2in chrome rear axle cover with 3/4 studs.
- 1 inch Side Walls
- ID: 7-1/4"
- Height: 2-3/4"
- 7-1/4" dia. axle, 12 of 1/2" studs
3/4" standard Push on bolt cover. Used on bumper and frame bolts.
- Chrome plated steel
- Across Flat: 3/4"
- Height: 11/16"
Chrome steel horn cover: round horn cover for 6.5 inch to 7 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
Flap weights: 24in chrome bottom flap weight with 3 holes--hardware included. Per each
BOTTOM MUD FLAP PLATE WITH 3 HOLES
- 11.5 Gauge - chrome steel 14 gauge
- Without Backing Plate
- Size: 4" X 24"
- SOLD BY EACH
- 3" x 18"
- 11.5 gauge - chrome steel 14 gauge
- Without Backing Plate
- Mounting hardware is included
16" Mud Flap Weights
- 3" x 16"
- 11.5 gauge - chrome steel 14 gauge
- Without Backing Plate
- Mounting hardware is included
- Made of 11.5 gauge chrome steel
- Mounting hardware included
- Bottom mud flap plate with 3 studs without backing plate
- 4 Studs on back
- 2" x 24"
- 11.5 gauge - chrome plated steel
- Stainless Steel
- 4" x 24"
- No backing plate
Clear lens when off, lights up red when lit.
Dual function uses standard 3 prong plug. grommet mount.
Material | Chrome Plastic |
Features | With flange |
Across Flat | Height | Application |
33mm | 3-3/8" | Push-on |
Material | Chrome Plastic |
Features | With flange |
Part No. | Across Flat | Height | Application |
10282 | 1-1/2" | 3-3/8" | Push-on |
Bullet Push-On Lug Nut Cover without Flange
Material | Chrome Plastic |
Fits | For most trucks |
Features | Without flange |
33MM Bullet Flange Lug Nut Cover
Material: Chrome plated steel
Height: 2-1/2"
9/16" Chrome Standard Nut Cover
- Across Flat measurement: 9/16"
- Height: 11/16"
6 notch fits at 4, 5, 6 notch hub cap, except all international 6 even notch hub caps
Chrome Plated
Fits 1" long lip |
For wheel with 8-23/32" dia. center hole |
Sold by Each
- Fits 8.5 inch diameter axle with 8 - 5/8" studs
- 8 inch inside diameter with 3 inch overall height
- 1.5 inch side wall designed for newer truck axles with longer studs
- Sold as each
- 8-1/2" dia. axle, 8 of 5/8" studs, also fits "Peterbilt" 1995 up
- 4-5/8" (H), I.D. 8"
- 14 gauge stainless steel
- Mounting hardware included
- Bottom mud flap plate with 3 studs
- Sold by each
5/16" Dia. Chrome Steel |
Width: 24"
Height: 21"
Material | Aluminum with DOT-C2 Conspicuity Tape |
Size | Straight: 24" |
- Aluminum reflector top plates with DOT-C2 conspicuity tape
- Size- 22 inches in length when measured across, 25-1/2 inches along top edge
- Sold by Pair
Chrome ABS plastic |
Removable Cap only for the Standard Axle Covers for Grand General sets
1 pc. removable cap (40139)
STANDARD CHROME STEEL PUSH-ON LUG NUT COVER W/ FLANGE
Material | Chrome plated steel |
Part No. | Across Flat | Height |
10160 | 1-1/8" | 1-5/8" |
- Material: Chrome Plastic
- Fits: Most trucks with 33mm Lug Nuts
- Screw On
- Hex Flat Top
Part No. | Across Flat | Height |
10269 | 33mm | 3-1/8" |
Concealing your open lug nuts with Grand General's lug nut covers is the easiest and most cost effective way to dramatically change the look of your vehicle. Our wide selection of covers come in many different designs to cater to the OEM look or an aggressive aftermarket style. Made from high quality ABS plastic for a true and secure fit.
Material | Chrome plated steel |
Part No. | Across Flat | Height |
10273 | 33mm | 2-3/8" |
Part No. | Across Flat | Height | Application |
10287 | 1-1/2" | 2-1/2" | Push-on |
Material: Chrome Plastic
- Size 1-13/16" (H)
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
- 5/8 Inches Lip
Rim Diameter | 5 Inches |
---|