• Trailer hub cap clip set for newer/late models
• Special designed clip is used on Stemco axle cap to hold regular rear hub cap
• Hold 8" dia. hub cap (20020)
• Set of 3

4 notch chrome front hub cap short lip with hub odometer hole. Included clips for mounting.

Front chrome axle cover 8 23/32" 5 notch short lip hub cap. Fits Newer peterbilt/volvo/ford.

Includes clips for mounting.

• Fits 8-1/2" dia. axle, 8 of 5/8" studs, Also fits Peterbilt 1995 and later
• Size- 1" (H) side wall, Sold by each
• 8" I.D

• Chrome plated steel
• Fits Rear hub caps
• Cone shape
• 8-1/2" dia. axle, 8 of 5/8" studs, also fits "Peterbilt" 1995 up

• ID: 7-1/4"
• Height: 2-3/4"
• 7-1/4" dia. axle, 12 of 1/2" studs

3/4" standard Push on bolt cover. Used on bumper and frame bolts.

• Chrome plated steel
• Across Flat: 3/4"
• Height: 11/16"

Stainless steel horn cover 4 welded snap-in clips for mounting fits 4 5/8" x 7 3/8" horn bell (Fits Grover rectangular air horns)

Flap weights: 24in chrome bottom flap weight with 3 holes--hardware included. Per each

BOTTOM MUD FLAP PLATE WITH 3 HOLES

• 11.5 Gauge - chrome steel 14 gauge
• Without Backing Plate
• Size: 4" X 24"
• SOLD BY EACH

• 4 Studs on back
• 2" x 24"
• 11.5 gauge - chrome plated steel

• Stainless Steel
• 4" x 24"
• No backing plate

Bullet Push-On Lug Nut Cover without Flange

6 notch fits at 4, 5, 6 notch hub cap, except all international 6 even notch hub caps

Chrome Plated

Sold by Each

Material: Chrome Plated Steel

Set Contains: 

3 - "U" Bolts

3 - Backing plates

3 - Rubber washers

6 - Washers

6 - Nuts

• Aluminum reflector top plates with DOT-C2 conspicuity tape
• Size- 22 inches in length when measured across, 25-1/2 inches along top edge
• Sold by Pair

• Stainless Steel 6" Convex blind spot mirror with center mount for trucks, buses, utility vehicles and more
• The round Convex mirror helps to improve visibility and eliminate blind spots
• Built with high quality Stainless Steel housing
• 5/16" Female adjustable ball stud for view angle rearrangement and the heavy duty "l-shape" bracket for easy installation

• For wheel with 8-23/32" dia. center hole
• Sold by each

Driver Vehicle Inspection with Carbon

8-1/2" (W) x 5-1/2" (L) Overall Size

‧Helps satisfy DOT vehicle inspection regulations - §396.11 and §396.13 ‧Take the worry out of complying with DOT inspection regulations. ‧Detailed DVIR's list specific tractor and trailer parts to help simplify inspection. Drivers simply check off part that need repair. Book formats include key regulations printed on inside front cover to remind drivers of DOT - required procedures. ‧2-ply, book format ‧31 sets of forms per book

Stainless Steel Flange Mount Bezel with GG Watermelon Light Mount Holes

• 430 grade stainless steel bezel
• Fits standard 4-3/8" diameter hole

High polished, show quality, durable, stainless steel flange mount bezels—no more loose pieces and rattling! Drivers can now ride in style with the convenience of easily installing our line of watermelon lights onto any standard 4-3/8" dia hole, avoiding an otherwise puzzling and tough installation process. Perfect for rear of cab, center panels, or light bars. Order with us today!

Glass Flush Mount 1 Wire Dark Amber Watermelon Light

• Dark Amber Glass Lens
• Sold Individually 
• Glass lens
• Stainless steel bezel
• Function: Marker & Clearance 

4 inch Red Plastic Lens

3 Screw Plastic Lens-Red

Chrome Steel Wheel Nut Cover

• Width: 1 1/16"
• Height: 2"

• Flush Mount Kit
• No Lens (sold separately) 
• 1 Wire

 Amber/Red 4 " Round Double Faced Pearl 24-LED Pedestal Light with Chrome Die Cast Housing

• Polycarbonate lens and chrome die cast housing
• 3 wire connection
• 24 LEDs per side, 12V

3.5" Dark Amber Watermelon Lens

• Size: 3 ½” dia. x 2 ⁷⁄₁₆" (H) 
• Material: Glass
• Color: Dark Amber
• Lens Only

4" Red/Red Smart Dynamic LED Light

• 4-5/16" Dia. x 1-1/8" (H)
• 26 LEDs - 12V
• Built-in smart chip to sense turn or stop signal
  Stop function: full lit (non-sequential)
  Turn function: sequential
• Sealed polycarbonate lens, reflector and housing
• Adapter plug (87368) included
• Red LED 
• Red Lens

• 14 gauge Chrome stainless steel
• No Backer Plate
• 3 studs on back design giving the bottom plate a clean finished appearance
• Mounting hardware is included
• 24 inch x 4 inch

6 Notch Front Hub Cap With Hub Hole

• Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole. 6 notch fits all 4, 5, 6 even and 6 uneven.
• Hubdometer Cap w/ 4.75" Dia. Opening
• 6 Notches and 6 Clips

• DOT (Department of Transportation) compliant for street legal lighting; meets or exceeds DOT and/or SAE standards
• 3" (Diameter) x 1-1/4" (D) x 3-1/4" (H) with 1-1/2" (L) stud; High impact polycarbonate lens with chrome die cast housing
• Amber/Red LEDs with matching Amber/Red Lens; 3 wires for dual high and low functions
• 14 high power LEDs per each side with pearl style reflector design for superior light distribution
• 12 volt with low ampere draw; sold as each

Light for 91300 Bar (See related products)

• 18 Red High Power LED - 12V
• 5-3/4" Dia. x 1-1/2" (H)
• Chrome twist, lock & go bezel
• Easy one piece installation, do not need grommet
• Sealed polycarbonate red lens, housing, black flange and chrome plastic bezel
• Surface mount
• Uses standard 3-prong pigtail

3" Stainless Steel Pedestal Light Extension

• Chrome aluminum pedestal extension with stainless steel wrap and stainless steel mirror clip
• Fits: Grand General pedestal lights 78360 (4" round) series & 75190 (3" round) series
• Size: 3" (L) x 1-3/16" dia.

• Aluminum housing
• 2 keys included
• Helps prevent trailers from being stolen.