Grand General
Chrome front axle cover with 4 notches for newer steel and older aluminum wheels
- Lip: 7/16"
- Notches: 4
- Clips: 4
- Size 1-13/16" (H)
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" diameter center hole
- 7/16" short lip for steel wheel
- 4 Notches
- 4 Clips
4 notch chrome front hub cap short lip with hub odometer hole. Included clips for mounting.
Front chrome axle cover 8 23/32" 5 notch short lip hub cap. Fits Newer peterbilt/volvo/ford.
Includes clips for mounting.
- Fits 8-1/2" dia. axle, 8 of 5/8" studs, Also fits Peterbilt 1995 and later
- Size- 1" (H) side wall, Sold by each
- 8" I.D
- Chrome plated steel
- Fits Rear hub caps
- Cone shape
- 8-1/2" dia. axle, 8 of 5/8" studs, also fits "Peterbilt" 1995 up
- ID: 7-1/4"
- Height: 2-3/4"
- 7-1/4" dia. axle, 12 of 1/2" studs
Chrome steel horn cover: round horn cover for 6.5 inch to 7 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
Chrome steel horn cover: round horn cover for 7.25 inch to 7.5 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
Use Grand General 69991 Heavy Duty Train Horn for horn.
- 8-1/4 inches length x 4 inches width x 1-3/4 inches diameter
- Fits standard 6.5 inches oval light with grommet (not included)
- Chrome plated durable steel
Flap weights: 24in chrome bottom flap weight with 3 holes--hardware included. Per each
BOTTOM MUD FLAP PLATE WITH 3 HOLES
- 11.5 Gauge - chrome steel 14 gauge
- Without Backing Plate
- Size: 4" X 24"
- SOLD BY EACH
- 4 Studs on back
- 2" x 24"
- 11.5 gauge - chrome plated steel
- Stainless Steel
- 4" x 24"
- No backing plate
Material | Chrome Plastic |
Features | With flange |
Across Flat | Height | Application |
33mm | 3-3/8" | Push-on |
Bullet Push-On Lug Nut Cover without Flange
Material | Chrome Plastic |
Fits | For most trucks |
Features | Without flange |
6 notch fits at 4, 5, 6 notch hub cap, except all international 6 even notch hub caps
Chrome Plated
Fits 1" long lip |
For wheel with 8-23/32" dia. center hole |
Sold by Each
5/16" Dia. Chrome Steel |
Width: 24"
Height: 21"
5/16" Dia. Chrome Steel |
Sold by Each
Width: 24"
Height: 18"
Stainless Steel 7” Convex Blind Spot Mirror
- Stainless Steel 7" Convex blind spot mirror for trucks, buses, utility vehicles and more
- Helps to improve visibility and eliminate blind spots
- Comes with high quality Stainless Steel housing to give it the finishing touch
- 5/16" Female adjustable ball stud for view angle rearrangement and the heavy duty "l-shape" bracket for easy installation
- Material: Stainless Steel
- Overall dimension: 1-5/8 inch side x 2-1/4 inch height x 1-1/4 inch side; 1-1/4 inch width
- Slots: 1-5/8 inch side has 5/8 inch x 1/2 inch slot; 1-1/4 inch side has 5/8 inch x 3/8 inch slot
- Material: Chrome Plastic
- Fits: Most trucks with 33mm Lug Nuts
- Screw On
- Hex Flat Top
Material | Chrome plated steel |
Fits | GMC Top Kick Medium Duty Truck |
Part No. | Across Flat | Height |
10411 | 30mm | 2" |
Chrome Plated Front Hubdometer Cap, 1 Inch Lip, 6 Uneven Notches
- Features 1” long lip for aluminum wheel
- Fits 20”, 22.5” and 24.5” wheel with 8-23/32” dia. center hole
- Stainless steel, universal standard front hub caps
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole. 6 notch fits all 4, 5, 6 even and 6 uneven
- 5/8 inch lip fits both steel and aluminum wheel
- 2 inch high; 6 clips included
- Sold by each
- Hardware included
- Width: 24"
- Height 2"
- Material: 14 gauge - stainless steel
- 4 Studs on back
Universal Front Hub Cap in Cove Shape
Lip: 7/16"
Notches: 6
Clips: 4
3" High
Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
6 notch fits all 4, 5, and 6 uneven notch hubs
Driver Vehicle Inspection with Carbon
8-1/2" (W) x 5-1/2" (L) Overall Size
‧Helps satisfy DOT vehicle inspection regulations - §396.11 and §396.13 ‧Take the worry out of complying with DOT inspection regulations. ‧Detailed DVIR's list specific tractor and trailer parts to help simplify inspection. Drivers simply check off part that need repair. Book formats include key regulations printed on inside front cover to remind drivers of DOT - required procedures. ‧2-ply, book format ‧31 sets of forms per book
Stainless Steel Flange Mount Bezel with GG Watermelon Light Mount Holes
- 430 grade stainless steel bezel
- Fits standard 4-3/8" diameter hole
High polished, show quality, durable, stainless steel flange mount bezels—no more loose pieces and rattling! Drivers can now ride in style with the convenience of easily installing our line of watermelon lights onto any standard 4-3/8" dia hole, avoiding an otherwise puzzling and tough installation process. Perfect for rear of cab, center panels, or light bars. Order with us today!
Stainless Steel Top Flap Weight 4 Hole
- 14 gauge stainless steel
- 4 holes for mounting
- Mounting hardware is included
- 24 inch x 2 inch
- Sold as each
Glass Flush Mount 1 Wire Dark Amber Watermelon Light
For all purposes, increases your driving visibility 1 wire hole & 2 screw holes required |
- Dark Amber Glass Lens
- Sold Individually
- Glass lens
- Stainless steel bezel
- Function: Marker & Clearance
4 inch Red Plastic Lens
3 Screw Plastic Lens-Red
Chrome Steel Wheel Nut Cover
- Width: 1 1/16"
- Height: 2"
- Flush Mount Kit
- No Lens (sold separately)
- 1 Wire