Grand General
- Fits 8-1/2" dia. axle, 8 of 5/8" studs, Also fits Peterbilt 1995 and later
- Size- 1" (H) side wall, Sold by each
- 8" I.D
- Fits 20 inch, 22.5 inch and 24.5 inch wheels with 8-23/32 inch diameter center hole
- Designed for 6 uneven notch hubs
- 1 inch lip for aluminum wheel
- 1-13/16 inch high; 6 clips included
Chrome front axle cover with 4 notches for newer steel and older aluminum wheels
- Lip: 7/16"
- Notches: 4
- Clips: 4
4 notch chrome front hub cap short lip with hub odometer hole. Included clips for mounting.
Front chrome axle cover 8 23/32" 5 notch short lip hub cap. Fits Newer peterbilt/volvo/ford.
Includes clips for mounting.
Rear Axle Cover
- Chrome Plated Steel
- 8 1/2in chrome rear axle cover with 3/4 studs.
- 1 inch Side Walls
- ID: 7-1/4"
- Height: 2-3/4"
- 7-1/4" dia. axle, 12 of 1/2" studs
6 notch fits at 4, 5, 6 notch hub cap, except all international 6 even notch hub caps
Chrome Plated
Fits 1" long lip |
For wheel with 8-23/32" dia. center hole |
Sold by Each
Material | Aluminum with DOT-C2 Conspicuity Tape |
Size | Straight: 24" |
- Material: Chrome Plastic
- Fits: Most trucks with 33mm Lug Nuts
- Screw On
- Hex Flat Top
Part No. | Across Flat | Height |
10269 | 33mm | 3-1/8" |
Concealing your open lug nuts with Grand General's lug nut covers is the easiest and most cost effective way to dramatically change the look of your vehicle. Our wide selection of covers come in many different designs to cater to the OEM look or an aggressive aftermarket style. Made from high quality ABS plastic for a true and secure fit.
- Chrome plated steel, universal front hub cap in cone shape
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
- 6 notch fits all 4, 5, and 6 uneven notch hubs
- 1 inch long lip for aluminum
- Size- 3" (H); Sold by each
- For wheel with 8-23/32" dia. center hole
- Sold by each
Stainless Steel Flange Mount Bezel with GG Watermelon Light Mount Holes
- 430 grade stainless steel bezel
- Fits standard 4-3/8" diameter hole
High polished, show quality, durable, stainless steel flange mount bezels—no more loose pieces and rattling! Drivers can now ride in style with the convenience of easily installing our line of watermelon lights onto any standard 4-3/8" dia hole, avoiding an otherwise puzzling and tough installation process. Perfect for rear of cab, center panels, or light bars. Order with us today!
- Bulb: No. 912, 12V, 0.27amps
- Polycarbonate lens, chrome plastic housing, stainless steel screws, soft plastic washer, sponge gasket
- Amber plastic lens
Peterbilt 2006 Speedometer/Tachometer Gauge Bezel
- Snap On
- Size: 4 1/16" diameter
4" Amber/Amber Smart Dynamic LED Light
- 4-5/16" Dia. x 1-1/8" (H)
- 26 LEDs - 12V
- Built-in smart chip to sense turn or stop signal
Stop function: full lit (non-sequential)
Turn function: sequential - Sealed polycarbonate lens, reflector and housing
- Adapter plug (87368) included
- Amber LED's
- Amber Lens
- 20 Red LEDs - 12V
- Clear Lens
- Size: 4-1/4" dia. x 1-5/16"(H)
- Sealed polycarbonate lens, reflector and housing
- Hardwired with 3 contact female plug
Replacement lens for Cab Marker Lights
Material | Chrome plated steel |
Fits | Hino trucks |
Features | Without flange |
Part No. | Across Flat | Height |
10220 | 40.6mm | 2" |
- Trailer hub cap clip set for newer/late models
- Special designed clip is used on Stemco axle cap to hold regular rear hub cap
- Hold 8" dia. hub cap (20020)
- Set of 3
- Chrome plated steel
- Fits Rear hub caps
- Cone shape
- 8-1/2" dia. axle, 8 of 5/8" studs, also fits "Peterbilt" 1995 up
Lugnut covers body/frame: 1" standard chrome bolt cover. Used on many frame bolts.
Material: Chrome Plated Steel
1" Wide
1-1/4" Tall
Stainless steel horn cover 4 welded snap-in clips for mounting fits 4 5/8" x 7 3/8" horn bell (Fits Grover rectangular air horns)
Chrome steel horn cover: round horn cover for 6.5 inch to 7 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
Chrome steel horn cover: round horn cover for 7.25 inch to 7.5 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
Use Grand General 69991 Heavy Duty Train Horn for horn.
Flap weights: 24in chrome bottom flap weight with 3 holes--hardware included. Per each
BOTTOM MUD FLAP PLATE WITH 3 HOLES
- 11.5 Gauge - chrome steel 14 gauge
- Without Backing Plate
- Size: 4" X 24"
- SOLD BY EACH
Material | Chrome Plastic |
Features | With flange |
Across Flat | Height | Application |
33mm | 3-3/8" | Push-on |
Material | Chrome Plastic |
Features | With flange |
Part No. | Across Flat | Height | Application |
10282 | 1-1/2" | 3-3/8" | Push-on |
Bullet Push-On Lug Nut Cover without Flange
Material | Chrome Plastic |
Fits | For most trucks |
Features | Without flange |
- Fits 8.5 inch diameter axle with 8 - 5/8" studs
- 8 inch inside diameter with 3 inch overall height
- 1.5 inch side wall designed for newer truck axles with longer studs
- Sold as each