Shop Grand General Categories
Grand General
- Trailer hub cap clip set for newer/late models
- Special designed clip is used on Stemco axle cap to hold regular rear hub cap
- Hold 8" dia. hub cap (20020)
- Set of 3
Chrome front axle cover with 4 notches for newer steel and older aluminum wheels
- Lip: 7/16"
- Notches: 4
- Clips: 4
4 notch chrome front hub cap short lip with hub odometer hole. Included clips for mounting.
Front chrome axle cover 8 23/32" 5 notch short lip hub cap. Fits Newer peterbilt/volvo/ford.
Includes clips for mounting.
- Fits 8-1/2" dia. axle, 8 of 5/8" studs, Also fits Peterbilt 1995 and later
- Size- 1" (H) side wall, Sold by each
- 8" I.D
- Chrome plated steel
- Fits Rear hub caps
- Cone shape
- 8-1/2" dia. axle, 8 of 5/8" studs, also fits "Peterbilt" 1995 up
Lugnut covers body/frame: 1" standard chrome bolt cover. Used on many frame bolts.
Material: Chrome Plated Steel
1" Wide
1-1/4" Tall
Stainless steel horn cover 4 welded snap-in clips for mounting fits 4 5/8" x 7 3/8" horn bell (Fits Grover rectangular air horns)
Chrome steel horn cover: round horn cover for 6.5 inch to 7 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
Chrome steel horn cover: round horn cover for 7.25 inch to 7.5 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
Use Grand General 69991 Heavy Duty Train Horn for horn.
Flap weights: 24in chrome bottom flap weight with 3 holes--hardware included. Per each
BOTTOM MUD FLAP PLATE WITH 3 HOLES
- 11.5 Gauge - chrome steel 14 gauge
- Without Backing Plate
- Size: 4" X 24"
- SOLD BY EACH
| Material | Chrome Plastic |
| Features | With flange |
| Across Flat | Height | Application |
| 33mm | 3-3/8" | Push-on |
| Material | Chrome Plastic |
| Features | With flange |
| Part No. | Across Flat | Height | Application |
| 10282 | 1-1/2" | 3-3/8" | Push-on |
Bullet Push-On Lug Nut Cover without Flange
| Material | Chrome Plastic |
| Fits | For most trucks |
| Features | Without flange |
6 notch fits at 4, 5, 6 notch hub cap, except all international 6 even notch hub caps
Chrome Plated
| Fits 1" long lip |
| For wheel with 8-23/32" dia. center hole |
Sold by Each
- Fits 8.5 inch diameter axle with 8 - 5/8" studs
- 8 inch inside diameter with 3 inch overall height
- 1.5 inch side wall designed for newer truck axles with longer studs
- Sold as each
BOTTOM MUD FLAP PLATE WITH 3 HOLES
- 11.5 Gauge - Stainless Steel
- Without Backing Plate
- Size: 4" X 24"
- SOLD BY EACH
Material: Chrome Plated Steel
Set Contains:
3 - "U" Bolts
3 - Backing plates
3 - Rubber washers
6 - Washers
6 - Nuts
| Material | Aluminum with DOT-C2 Conspicuity Tape |
| Size | Straight: 24" |
- Aluminum reflector top plates with DOT-C2 conspicuity tape
- Size- 22 inches in length when measured across, 25-1/2 inches along top edge
- Sold by Pair
Stainless Steel 7” Convex Blind Spot Mirror
- Stainless Steel 7" Convex blind spot mirror for trucks, buses, utility vehicles and more
- Helps to improve visibility and eliminate blind spots
- Comes with high quality Stainless Steel housing to give it the finishing touch
- 5/16" Female adjustable ball stud for view angle rearrangement and the heavy duty "l-shape" bracket for easy installation
| Material | Chrome plated steel |
| Fits | Hino trucks |
| Features | Without flange |
| Part No. | Across Flat | Height |
| 10220 | 40.6mm | 2" |
- Material: Chrome Plastic
- Fits: Most trucks with 33mm Lug Nuts
- Screw On
- Hex Flat Top
| Material | Chrome plastic |
| Size | 3" (H) |
| Fits | Most trucks with 33mm lug nuts |
| Part No. | Across Flat | Height | Application |
| 10287 | 1-1/2" | 2-1/2" | Push-on |
Material: Chrome Plastic
Chrome Plated Front Hubdometer Cap, 1 Inch Lip, 6 Uneven Notches
- Features 1” long lip for aluminum wheel
- Fits 20”, 22.5” and 24.5” wheel with 8-23/32” dia. center hole
- Stainless steel, universal standard front hub caps
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole. 6 notch fits all 4, 5, 6 even and 6 uneven
- 5/8 inch lip fits both steel and aluminum wheel
- 2 inch high; 6 clips included
- Sold by each
- Chrome plated steel, universal front hub cap in cone shape
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
- 6 notch fits all 4, 5, and 6 uneven notch hubs
- 1 inch long lip for aluminum
- Size- 3" (H); Sold by each
- For wheel with 8-23/32" dia. center hole
- Sold by each
- Chrome plated steel, universal front hub cap in standard shape
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
- 6 notch fits all 4, 5, and 6 uneven notch hubs
- 1 inch long lip for aluminum
- Sold By Each
Size: 5" (W) x 4" (L) Overall Size
Meet DOT's annual inspection requirements. Including complying with §396.17(c)(2) with help from these labels.
Note: On vinyl labels, use indelible permanent ink that will not fade in direct sunlight.
‧Vinyl with protective laminate, 2-ply
This form provides ample room for recording identification data and component conditions. It reflects DOT record keeping criteria for annual vehicle inspections - §396.21. Also includes minimum periodic insepection standards (Appendix G to Subchapter B) on the back of the form to help reinforce DOT vehicle inspection requirements. Durable 100-lb. manila ply helps preserve report
‧3-ply with carbon
Universal Front Hub Cap in Cove Shape
Lip: 7/16"
Notches: 6
Clips: 4
3" High
Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
6 notch fits all 4, 5, and 6 uneven notch hubs
Stainless Steel Flange Mount Bezel with GG Watermelon Light Mount Holes
- 430 grade stainless steel bezel
- Fits standard 4-3/8" diameter hole
High polished, show quality, durable, stainless steel flange mount bezels—no more loose pieces and rattling! Drivers can now ride in style with the convenience of easily installing our line of watermelon lights onto any standard 4-3/8" dia hole, avoiding an otherwise puzzling and tough installation process. Perfect for rear of cab, center panels, or light bars. Order with us today!
