• Beautiful high quality chrome plated finish with triple chrome plating process.
• Fits 5-7/16 DIA. speedometer or tachometer gauge.
• Easy snap-on installation.
• Fits various Kenworth years and models.

• Features 4 bright LEDs with Abyss lens design gives unique infinity vision effect.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Durable plastic housing with 2 contact female plug, work on all 12V DC system.
• Recommend use with 2-pin male plug, item #34210, 34215 (not included).
• Mounts with standard 2" round rubber push-in grommet, item #31505 (not included).
• DOT/SAE P2, FMVSS 108.
• IP67 water resistant.

• Features 4 bright LEDs with Abyss lens design gives unique infinity vision effect.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Durable plastic housing with 2 contact female plug, work on all 12V DC system.
• Recommend use with 2-pin male plug, item #34210, 34215 (not included).
• Mounts with standard 2" round rubber push-in grommet, item #31505 (not included).
• DOT/SAE P2, FMVSS 108.
• IP67 water resistant.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.

• Quality injection molded plastic for durability.
• Beautiful triple chrome plated finish.
• Double sided tape pre-applied.

• Round cab light with 17 LED, watermelon style lens.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Red LED with clear lens.
• Fully sealed, fits existing light housing.
• Hard wired with two .180 bullet plugs.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• Original design with mounting tabs, simply snaps into place.

• Stainless steel.
• Air valve panel trim.
• Fits Volvo VN and VT models.

• LED light bar is approximately 17" long x 1 3/8" wide x 1" tall.
• Amber Lens & Amber LED
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Mounting holes are approximately 16 1/8" apart.
• Fully sealed electronic solid state circuit boards are designed to operate at 12V DC.

• Highly polished 430 stainless steel.
• Stainless steel finish.
• Truck spring mount tow hole cover.

• High quality injection molded plastic.
• Chrome plated finish with triple chrome plating process.
• Easy install with pre-applied double sided tapes.
• Driver side application.

• High quality injection molded plastic.
• Chrome plated finish with triple chrome plating process.
• Easy install with pre-applied double sided tapes.
• Passenger side application.

• Beautiful chrome plated finish with triple chrome plating process.
• 4-1/2" chrome aluminum pointed trailer brake handle.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel bracket for single stud pedestal light, and CB antenna.
• Mounts onto mirror arm. Simply remove two mirror arm mounting screws, install the bracket, and reinstall the existing screws.

• PASSENGER SIDE

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel bracket for single stud pedestal light, and CB antenna.
• Mounts onto mirror arm. Simply remove two mirror arm mounting screws, install the bracket, and reinstall the existing screws.

• Beautiful chrome plated finish with triple chrome plating process.
• Durable injection molded plastic.
• Easy snap-on installation. Direct replacement of the original trim.

• Bright LEDs behind quality polycarbonate lens.
• Chrome plated housing with mounting hardware.
• Works with any 12V DC system.
• Easy wiring with 3 hardwired leads.

• Heavy duty chrome plated metal housing with stud mounting.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Beautiful high quality chrome plated injection molded plastic.
• Unique reflector design projects light in multiple directions.
• For auxiliary or utility light applications, 3 hard wired leads.
• Works with any 12V DC system.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Quality rubber gasket included.
• Flat base design.

• Quality injection molded plastic for durability.
• OEM #134721031.
• Driver side application.

• Quality injection molded plastic for durability.
• OEM #134721032.
• Passenger side application.

• Chrome small/auxiliary wide angle mirror for 2001 Freightliner Columbia.
• Manual operation, chrome mirror cover.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel.
• 3 license plate holder.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel lower sleeper window trim for Kenworth.

• Heavy duty internal spring design.
• Thick end plates with welded heavy duty mounting studs and matching fasteners.
• 2-1/2" Center to center mounting bolt pattern.
• Beautiful high quality black finish for durability and shine.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Fully epoxy sealed electronics to resist corrosion and moisture.
• Fits most Kenworth W900 and T800.
• Fits existing Grakon 5000 style light housing.
• 2 wires (1 wire with ring terminal), works with any 12V DC system.

• Heavy duty internal spring design with quality 14 gauge material.
• Thick end plates with welded heavy duty mounting studs and matching fasteners.
• Open ended profile

• Heavy duty internal spring design.
• Thick end plates with welded heavy duty mounting studs and matching fasteners.
• Stainless steel end cap pre-installed.
• 2" Center to center mounting bolt pattern.
• Beautiful high quality chrome plated finish with triple chrome plating process.

• Complete hood mirror, includes mounting arm, backing plate and hardware.
• OEM number: A2273902000.
• Driver Side application.

• Chrome main mirror for 2001 Freightliner Columbia.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Passenger side application.

• Chrome main mirror for 2001 Freightliner Columbia.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Driver side application.

• Chrome LED Freightliner FLD headlight bezel with incandescent turn signal.
• High quality chrome finish for durability and shine.
• Chrome plated finish with triple chrome plating process.
• Fits 1989-2009 Freightliner FLD trucks with integral sleeper.
• Fits Freightliner FLD with 2 piece clip-on turn signal headlight bezel.
• 19 amber LED with clear lens with reflector.

• Sold in PAIRs
• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel Peterbilt front air cleaner bracket with 12X 2" LED lights.
• Stainless steel front air cleaner light bracket available separately: item #30060 with 12 light cutouts.
• 9 amber LED with amber lens reflector style item #38849B.
• Available with chrome light bezel item #10458.

• Passenger Side 

• Chrome Inner Housing

• Impact resistant polycarbonate lens provide unparalleled protection from road hazards, with resistant lens.
• Low beam: 12V DC input, H11 bulb, 4.1 amps / 49.2 watt, FMVSS 571.
• High beam: 12V DC input, H1 bulb, 4.5 amps / 54 watt, FMVSS 571.
• Turn signal: 3157 bulb, Side marker: 914 bulb.
• DOT/SAE, FMVSS 108.
• Note: please do not discard unused factory headlight wiring harness.

• Chrome Inner Housing

• Impact resistant polycarbonate lens provide unparalleled protection from road hazards, with resistant lens.
• Low beam: 12V DC input, H11 bulb, 4.1 amps / 49.2 watt, FMVSS 571.
• High beam: 12V DC input, H1 bulb, 4.5 amps / 54 watt, FMVSS 571.
• Turn signal: 3157 bulb, Side marker: 914 bulb.
• DOT/SAE, FMVSS 108.
• Note: please do not discard unused factory headlight wiring harness.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Rear hub cap with hubometer cutout.
• Fits most 8 stud with 5/8" diameter studs rear axle.

• Abyss lens design gives unique infinity vision effect.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Electronics completely sealed in epoxy inside a corrosion and impact resistant housing.
• Durable plastic housing with 3 contact female plug.
• Works with any 12V DC system.
• Uses 3-pin electrical connector plug, item #34212/34216.
• Mounts with standard 4" round rubber push-in grommet, item #31515.
• DOT/SAE, FMVSS 108. Lifetime warranty.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Beautiful high quality chrome plated housing with triple chrome plating process.
• Features 11 super bright LED behind watermelon style lens.
• Hard wired with 2 wires.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Fully sealed electronics, works on all 12V DC systems.
• Heavy duty chrome plated metal housing with stud mounting.
• Beautiful high quality chrome plated housing with triple chrome plating process.
• Easy wiring with 3 hardwired leads.
• For auxiliary or utility light application.

• 19 LED flush mount marker/auxiliary light.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Amber LED with amber lens watermelon style item # 38313.
• Mounting studs are approximately 1-13/16" apart.
• Hard wired with two wires.

CHROME GUIDE 682-C HEADLIGHT NO BULB WITH ORIGINAL STYLE LED SIGNAL - AMBER LENS

• Beautiful high quality chrome plated housing and bezel with triple chrome plating process.

• Spring loaded rear light bar with 6 slanted up oval light cutouts.
• Each light bar has three slanted up oval light cutouts (total 6 cutouts).
• 2-1/2" bolt pattern.
• 5/8"-11 UNC thread studs.

ULTRALIT - 4" X 6" CRYSTAL HEADLIGHT WITH 9 WHITE LED POSITION LIGHT - LOW BEAM

• 4" X 6" (165 mm X 100 mm) rectangular crystal headlight
• Features 9 bright LED position light.
• Conversion adapter plug included.
• This module is low beam only, with halogen 9006 bulb.
• 9006-to-H4561 2-prong and 3-prong conversion plugs included.

ULTRALIT - 4" X 6" CRYSTAL HEADLIGHT WITH 9 WHITE LED POSITION LIGHT - HIGH BEAM

• 4" X 6" (165 mm X 100 mm) rectangular crystal headlight
• Features 9 bright LED position light.
• Conversion adapter plug included.
• This module is high beam only, with halogen 9005 bulb.
• 9005-to-H4561 2-prong conversion plug included.

• Bright amber LED cab light with quality lens.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Includes hardware and gasket, hard wired with two wires. White is ground, black is 12V .
• Fits Peterbilt 387, also fits various Peterbilt and Kenworth models.
• Pre-assembled with beautiful chrome plated plastic cab light housing.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel Peterbilt front air cleaner bracket with 8 X 17 LED lights.
• 17 amber LED with amber lens with reflector light item #39320 dual function.
• Available with chrome plastic bezel with visor item #39211.
• Stainless steel front air cleaner bracket available separately: item #(30975-1) 8 light cutouts.

• All LED headlight with white LED position light, amber LED turn signal, amber LED sidemarker light.
• Easy connection, plugs into existing wiring harness.
• DOT/SAE, FMVSS 108.
• High beam: 3300 Lumens, 3.5 Amps, 12V DC Input.
• Low beam: 1850 Lumens, 2.15 Amps, 12V DC Input

• All LED headlight with white LED position light, amber LED turn signal, amber LED sidemarker light.
• Easy connection, plugs into existing wiring harness.
• DOT/SAE, FMVSS 108.
• High beam: 3300 Lumens, 3.5 Amps, 12V DC Input.
• Low beam: 1850 Lumens, 2.15 Amps, 12V DC Input

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel Peterbilt front air cleaner bracket with 12X 17 LED lights.
• 17 LED with amber lens clear style with reflector (Part Number 39322) 
• Includes stainless steel bezel (Part Number 30317)
• Sold as Pair's

• Bottom plate replacement hardware kit.
• For bolt thru bottom plate.
• Hardware kit includes: 3 bolts, 3 nuts, 3 washer and 3 rubber inserts.