United Pacific

• Heavy duty internal spring design.
• Thick end plates with welded heavy duty mounting studs and matching fasteners.
• Stainless steel end cap pre-installed.
• 1-1/8" Center to center mounting bolt pattern.
• High quality chrome plated finish with triple chrome plating process.

• Injection molded ABS plastic that is high-impact, light-weight, and corrosion resistant.
• Removable dome shape cap.
• Universal fit, fits most 11-1/4" and bolt circle/center applications.
• Available with 33mm standard style thread-on nut covers.
• Fits most 20", 22-1/2", and 24-1/2" wheel.
• Each set includes 1 cover, 1 cap, and 10 nut covers.
• **A minimum of 6 threads extending through the top of each nut is required for installation.

• High quality polycarbonate lens with epoxy sealed circuit board.
• Heavy duty chrome plated metal housing, with stud mounting.
• 12 volt, dual function with 3 wire hookup (ground wire with ring terminal).

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Bright LEDs with vivid glow effect, patented GloLight design D763491.
• Fully sealed electronics, works on all 12V DC systems.
• Rear plastic housing with 3-pin female contact terminal.
• Recommend use with 3-pin male plug, item #34212, 34216 (not included).
• Recommend mount with rubber push-in grommet, item #31515 (not included).
• Available in retail packaging.
• DOT/SAE, FMVSS 108.
• IP67 water resistant rating.

• Driver Side Application
• High quality injection molded plastic with beautiful triple chrome plated finish.
• Direct replacements to original vent.

• High quality injection molded plastic with beautiful triple chrome plated finish.
• Direct replacement for various 2002 and newer Kenworth models.
• Easy installation, snaps in place of original vent.

• Highly polished 430 stainless steel fender and tube bracket.
• Internal mounting system eliminates the need for U-bolts and other external hardware.
• Rubber top mounted mud flap with mounting hardware included.
• Frame mounting post not included.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Electronics completely sealed in epoxy to resist corrosion and moisture.
• Beautiful chrome plated housing with metal mounting studs.
• 25 bright LEDs on each main lens and 3 LEDs on side mounted lens, patented GloLight design D771286.
• Straight forward wiring with 3 simple wire hook up, works on 12V DC systems,
• Wiring color code: White=Ground, Red=High function, Black=Low function.
• DOT/SAE, FMVSS108.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Electronics completely sealed in epoxy to resist corrosion and moisture.
• Beautiful chrome plated housing with metal mounting studs.
• 25 bright LEDs on each main lens and 3 LEDs on side mounted lens, patented GloLight design D771286.
• Straight forward wiring with 3 simple wire hook up, works on 12V DC systems,
• Wiring color code: White=Ground, Red=High function, Black=Low function.
• DOT/SAE, FMVSS108.

• 17 LED round cab light with chrome plastic housing.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Amber LED w/ amber lens, watermelon lens style item # 38152b.
• Hard wired with two .180 bullet plugs.

• Chrome plastic truck W900.
• Window trim w/hardware.
• Fits: Kenworth W900 daylite doors.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• For 579 model equipped with factory 7" navigation display.
• Pre-applied double sided tapes for easy installation.

• Unique aerodynamic lens design.
• Low beam application: HB3 (9005) light bulb, 12V DC input, 5 amps/55 watt.
• High beam application: H11 light bulb, 12V DC input, 4.38 amps/55 watt.
• Turn signal: 3157 light bulb.
• DOT/SAE, FMVSS 108.

• Heavy duty internal spring design with quality 14 gauge material.
• Thick end plates with welded heavy duty mounting studs and matching fasteners.
• Beautiful high quality chrome plated finish with triple chrome plating process.

• Original style with easy to install threaded mounting inserts.
• Unique aerodynamic lens design.
• Low beam application: H11 light bulb, 12V DC input, 4.38 amps/55 watt.
• High beam application: HB3 (9005) light bulb, 12V DC input, 5 amps/55 watt.
• Turn signal: 3157 light bulb.
• Marker light: 914 bulb.
• DOT/SAE, FMVSS 108

• Chrome floor stand mounting hardware only.
• Beautiful high quality chrome plated housing and bezel with triple chrome plating process.
• Available in bulk.

• Quality injection molded plastic for durability.
• Premium automotive paint in gloss, matte, or vibrant candy colors. Bold effects and dazzling color.
• Lower gearshift plastic cover for Eaton Fuller style 9/10/13/15/18 speed shifters.
• Easy to install with original style mounting screw holes (screws not included).
• Matching gearshift knobs, shifter shaft extensions, steering wheel spinners and air valve knobs available.

• 13/15/18 speed gearshift knob for Eaton fuller shift knob assemblies.
• Premium automotive paint in vibrant candy colors, bold effects and dazzling color.
• Stainless shift knob cover available separately, item #70176-2.
• Matching gearshift covers, shifter shaft extensions, steering wheel spinners and air valve knobs available.

• 13/15/18 speed gearshift knob for Eaton fuller shift knob assemblies.
• Premium automotive paint in vibrant candy colors, bold effects and dazzling color.
• Stainless shift knob cover available separately, item #70176-2.
• Matching gearshift covers, shifter shaft extensions, steering wheel spinners and air valve knobs available.

• High quality injection molded plastic in matte black finish.
• Fits over standard 33mm lug nuts on hub piloted wheel.
• Designed to cover up and hide the lug nut flange washer.
• Available individually, and convenience pack of 60 nut covers.
• A minimum of 3 threads extending through the top of each lug nut is required for proper thread engagement of nut covers.

• Stainless steel 15" air cleaner mounting strap for Peterbilt.
• OEM style custom 2-1/2" wide strap.
• 15" stainless steel air cleaner available separately item # (28200).

• Beautiful chrome plated finish with triple chrome plating process.
• Expanded/slotted bottom exhaust.
• Fits over a connecting exhaust.
• 5" curved exhaust.
• Available in 60" length.

• Made with quality die-cast aluminum.
• Features chrome 1/2"-13 thread-on adapter base for Eaton Fuller type shifter.
• Machined 1/2"-13 thread for smooth installation.
• Removable thread lock included to prevent loosening of shift.
• Not compatible with models equipped with D-shape shift knobs.

• Fits Peterbilt 2006 and Kenworth 2003  
• 18" rim steering wheel with beautiful chrome plated spokes.
• Includes quality chrome aluminum horn bezel and horn button.
• Solid heavy duty 40-spline hub with chrome plastic hub bezel.
• Special steering shaft nut also included.
• Install instructions included and available online as digital download.
• Warning: 2014 Peterbilt & Kenworth equipped with steering angle sensor & stability control require special installation. Consult installation instruction sheet to prevent vehicle damage.

• Painted wood rim with matching bezel and chrome horn button.
• 18" diameter with comfortable finger grips on back edge of rim.
• Fits all commercial 3 bolt hubs, sold separately.

• Painted wood rim with matching bezel and chrome horn button.
• 18" diameter with comfortable finger grips on back edge of rim.
• Fits all commercial 3 bolt hubs, sold separately.

• Fits Freightliner Century (1996-2010) & Columbia (2001-2010)
• Beautiful chrome plated injection molded plastic.
• Includes 2 chrome plastic screw hole covers.
• Original style with mounting screw holes and contours (screws not included).
• Also fits Coronado (2003-2022).

• High quality 430 stainless steel finish.
• Airleaf mounting bracket.
• Driver Side

• Trailer hub cap mounting bracket.
• Allows the use of standard 8" rear hub cap on the trailer axle.
• Mounting bracket for trailer oil seal cap, mounts directly onto the oil seal cap.

• Top plate replacement hardware.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Bolt thru top plate hardware includes: 4 bolts, 4 nuts, 4 washers, and 4 rubber inserts.

Chrome Dome Front Axle Cover 3 Piece Kit for Steel/Aluminum Wheel

• Chrome steel 3 piece dome front axle and hub cover.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Fits most 20", 22 1/2" and 24 1/2" wheels.
• Removable hub cap and axle hat, bolt pattern: 11-1/4" center to center, not tapered.
• Wheel hub piloted.
• 10 holes for 33 mm lug nuts.
• Hole diameter: 1-1/4"/32 mm.

• Chrome plastic interior view window trim for Kenworth.
• Daylight door view window trim.
• Fits various years and models.

• Quality injection molded plastic with triple chrome plated finish.
• For front/side hood emblem that measures 7-7/8" X 3-1/4".

• Beautiful chrome plated finish with original style mounting tabs and speed nuts.
• Include torx head screws for straight forward installation.
• Fits only on center bumper with mounting holes for the center bumper trim.
• Center bumper with mounting holes available separately: item # 20798.
• OEM number : 21-27299-001, 21-27297-000.

Shipped via Prepaid LTL Freight not charged at checkout. We will contact you with freight quote, delivery options. Contact us for freight quote at 

• Work on most dash light application.
• Standard 37/BP2 wedge base.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Bright LEDs with vivid glow effect, patented GloLight design US9,062,845B1.
• Fully sealed electronics, works on all 12V DC system.
• Rear plastic housing with 3-pin female contact terminal.
• Recommend use with 3-pin male plug, item #34212, 34216 (not included).
• Recommend mount with rubber push-in grommet, item #31515 (not included).
• DOT/SAE, FMVSS 108.
• IP67 water resistant rating.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Heavy duty internal spring design.
• Thick end plates with welded heavy duty mounting studs and matching fasteners.
• Stainless steel end cap pre-installed.
• 2-1/2" Center to center mounting bolt pattern.

• Projection headlight with amber LED turn signal, white LED position light bar.
• Unique patented lens and inner liner design adds definition to LED side marker, patent number d765,283/ d859,703.
• Easy installation with OE mounting hole positions. Includes long wiring loom for electrical hookup.
• Also fits 2010-2018 T440/T470 models.
• DOT/SAE, FMVSS 108.
• Low beam: H7 bulb,12V DC input, 4.1 amps / 49.2 watt.
• High beam: HB3 bulb, 12V DC input, 5.1 amps / 61.2 watt.
• Parking & turn signal: parking 0.14 amp turn signal 0.22 amp total / 0.3watt per LED.

• Quality injection molded plastic for durability.
• Beautiful chrome plated finish with triple chrome plating process.
• Fits various Freightliner models and years, double sided tape mount.

• Beautiful chrome plated finish with triple chrome plating process.
• Chrome plastic gauge bezel for Kenworth.
• Available with visor.
• Application: large 3-1/4" pyrometer.

• Quality injection molded plastic with triple chrome plated finish.
• Easy installation, push on to exiting gauges.
• Also fits Peterbilt 587 (2010-2016).

• Beautiful chrome plated finish with triple chrome plating process.
• Mounting clips pre-installed for easy installation.
• Fits 389 (2008-2023), 386 (2006-2016), AND 387 (2006-2011), 388 (2008-2014), 379/378 (2006-2007), 335 (2006-2010).
• Aftermarket replacement for OEM# S18-6032-282 & S18-6032-282R.

• Projection headlight with amber LED turn signal, white LED position light bar.
• Unique patented lens and inner liner design adds definition to LED side marker, patent number d765,283/ d859,703.
• Easy installation with OE mounting hole positions. Includes long wiring loom for electrical hookup.
• Also fits 2010-2018 T440/T470 models.
• DOT/SAE, FMVSS 108.
• Low beam: H7 bulb,12V DC input, 4.1 amps / 49.2 watt.
• High beam: HB3 bulb, 12V DC input, 5.1 amps / 61.2 watt.
• Parking & turn signal: parking 0.14 amp turn signal 0.22 amp total / 0.3watt per LED.

• Polycarbonate lens with fully epoxy sealed electronics.
• Bright energy efficient LEDs, work on all 12V DC system.
• Easy wiring with 3 hardwired wire leads.
• 1-1/2" tall when mounted.
• Light is 1 13/16(L) X 1 3/4 (W) X 1 3/4 (H).
• Works with any 12VDC system.

• 4 LED reflector clearance/marker light with chrome plastic bezel.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.

• Beautiful chrome plating with triple chrome plating process.
• Injection molded plastic with vent housing for ease of installation.
• Identical mounting design as original for easy replacement.
• Passenger Side