United Pacific

• Bright LEDs behind quality polycarbonate lens.
• Chrome plated housing with mounting hardware.
• Works with any 12V DC system.
• Easy wiring with 3 hardwired leads

• Beautiful chrome plated quality plastic with single original passenger side control switch opening.
• Fits 2006-2019 Peterbilt 379, 389, 388, 387, 386, 384 & various other models.
• Passenger side application.

• Chrome mirror cover for Kenworth T170/T270/T370/T440/T470/T600/T660/T800 trucks.
• Beautiful high quality black finish for durability and shine.
• OEM #: R59-1019-22.
• Driver side application

• Quality injected molded plastic with triple chrome plated finish.
• Beautiful synthetic crystal.
• Fits over any 1/4" diameter shafts.
• Dual set-screws help keep knob in place.

• Standard 194 wedge base.
• 360 degrees surround illumination, 180 degrees front illumination.

• Features long lasting, bright SMD LED.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Electronics completely sealed in epoxy to resist corrosion and moisture.
• Mounting holes approximately 16-1/8" apart.

• Aerodynamic branch deflector.
• Twist lock mounting.
• Available for 2" light.

• Aerodynamic branch deflector.
• Twist lock mounting.
• Available for 2 1/2" light.

• Mirage lens design gives unique limitless mirror effect.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Electronics completely sealed in epoxy to resist corrosion and moisture.
• Durable plastic housing with 3 contact female plug.
• Works with any 12V DC system.
• Uses 3-pin electrical connector plug, item # 34212/34216.
• Mounts with standard 6" oval rubber push-in grommet, item # 31506.
• DOT/SAE, FMVSS 108. Lifetime warranty.

• Hub cap mounting tool.
• Install hub caps in seconds.
• Place hub cap in the mounting tool.
• Align with the hub, and hit the protruding end of the mounting tool.

• Bold and unique headlight design. Patent number D866,822.
• Headlight assembly for Peterbilt 388/389 trucks.
• 100 LED white halo as Daytime Running Lights.
• Easy connection, plugs into existing wiring harness.
• Low beam: 2,500 Lumens, 1.13 Amps, 12V DC Input.
• High beam: 1,700 Lumens, 1.42 Amps, 12V DC Input.
• Load resistor may be needed on the low beam circuit. The load resistor is added low beam wire pin 5, and the resistor is grounded. Load resistor should be installed on the headlight harness under the hood with air circulation.
• Also fits Peterbilt 2005-2015 388, 2014-2022 567.
• Note: please do not discard unused factory headlight wiring harness.
• DOT/SAE, FMVSS 108.

• Simulates the sound of a vintage train whistle.
• Beautiful chrome plated finish with triple chrome plating process.
• Includes mounting hardware and 1/2" compression fitting.
• Powered by compressed air or live stream.
• Operating range from 30 psi to 120 psi and up.

• Bright LEDs with beautiful chrome plated bullet style housing.
• Perfect for custom installation on motorcycles & trucks.
• Housing can be purchase separately, item #30105B.
• 9 LED chrome mini bullet light.
• Amber LED with amber lens.
• Perfect for custom installation on motorcycles & trucks.
• Chrome bullet housing available separately: item # 30105b

• Square double face turn signal light.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• 25 amber LED 2 amber LED (side marker) 25 red LED.
• Amber & red LED with clear lens.
• Heavy duty chrome housing, double stud mounting.
• 3 wires (1 wires with ring terminal).
• Passenger side application.

• Square double face turn signal light.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• 25 amber LED 2 amber LED (side marker) 25 red LED.
• Amber & red LED with clear lens.
• Heavy duty chrome housing, double stud mounting.
• 3 wires (1 wires with ring terminal).

• 6 high power 3 watt SMD LED rectangular flood light.
• Heavy duty die-cast housing.
• Stainless steel mounting hardware.
• 12-36V DC application.
• 1440 lumens.

• Beautiful chrome plated finish with triple chrome plating process.
• Injection molded ABS plastic that is high-impact, light-weight, and corrosion resistant.
• Removable pointed shape cap.
• Universal fit, fits most 11-1/4" and bolt circle/center applications.
• Available with 33mm spike style thread-on nut covers.
• Fits most 20", 22-1/2", and 24-1/2" wheel.
• Thread-on nut cover can be purchase individually, item #10569B (chrome)/10548B (matte black).
• Includes everything you need to dress up your wheels.
• Kit includes: 2 front axle covers, 4 rear axle covers, 60 plastic 33mm thread-on nut covers & 1 nut cover tool.
• **A minimum of 3 threads extending through the top of each nut is required for installation.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Universal application, install anywhere.
• Mounting studs are approximately 8" apart.
• Design for any 12V system.

• High quality injection molded polycarbonate lens.
• Epoxy coated, fully sealed electronics.
• Energy efficient solid-state circuit board engineered for 12V DC systems.
• Feature 14 bright red LEDs.
• Easy wiring with 3 hardwired wire leads.
• Mounting holes approximately 11-7/16" apart.

• Features long lasting, bright SMD LED.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Mounting holes approximately 16-1/8" apart.
• Red LED with clear lens.

• Stainless steel mini light bracket with 13/16" round cutout.
• Available with 1 light cutout.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Hard wired with 2 wires.

• High quality chrome finish for durability and shine.
• US patent: D571,500, Canadian industrial design registration: 123372, Mexico design patent: 27174.
• Bright LED light bar pre-installed.
• 19 Amber LED with amber lens light bar item # 39773B.

• High quality polycarbonate lens with epoxy sealed circuit board.
• Mounting holes are approximately 11-7/16" apart.
• Dual brightness function, hard wired with 3 wire leads.

• Quality injection molded plastic for durability.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Original style design, direct replacement to original.
• Fits antenna assembly such as model #PSO-PFCPP803218.

• Quality original style mirror cover.
• Easy installation with OE style clips and mounting posts.
• Note: will not fit Cascadia Evolution.
• OEM part # TL28714.
• Passenger side application.

• Quality original style mirror cover.
• Easy installation with OE style clips and mounting posts.
• Note: will not fit Cascadia Evolution.
• OEM part # TL28715.
• Driver side application.

• Chrome plastic rocker switch cover for Kenworth.
• Fits Kenworth t2000, t700 and various other models.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel Peterbilt glove box cover.
• Folds over entire glove box.
• Fits 2006 Peterbilt 379, 389, 388, 387, 386, 384 and various other models.

• Bumper end for 2003-17 Volvo VN/VNL.
• 4 screw mount with protruding center.
• Available with fog light hole.
• OEM part number: 82721512, 82364726.
• Passenger side application.

• Quality plastic injection molded with OE spec detail and strengthening features.
• Aligns perfectly, interchangeable with OE.
• Clips and mounting hardware are included.
• Does not have cutouts and holes for center trim.
• Dark gray color, like original.
• OEM #21-28446-000.

Shipped via Prepaid LTL Freight not charged at checkout. We will contact you with freight quote, delivery options. Contact us for freight quote at 

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• Durable injection molded plastic.
• Fits over the existing A/C knob, not a replacement.

• Beautiful triple chrome plated finish.
• Quality injection molded plastic for durability.
• Pre-applied double sided tape for easy installatio

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel A/C control trim for Volvo.
• Fits Volvo VN/VNL & VT models.

• Fits Volvo VN/VNL and VT models.
• Quality injection molded plastic for durability.
• High quality chrome plated finish.
• Double sided tape included.
• Clean door handle surface before applying the cover.

• High quality plastic injection molded with OE spec detail and strengthening features.
• Features heavy duty steel mounting plates for direct bolt-on installation to truck frame.
• Includes clip-on nuts for straight forward bumper cover installation.
• Precision cut fog light hole with mounting points for fog light assembly.
• Direct replacement for OEM part number Z21-28619-002, 21-27301-004.
• Bumper end: item # 20848.
• Driver side application.

• Quality injection molded plastic with triple chrome plated finish.
• Fits over 4-3/8Ä X 7/8Ä Kenworth glove box emblem.
• Double sided tape on back for easy installation.

• High quality injection molded plastic with beautiful triple chrome plated finish.
• Double sided tape included for easy installation.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• 2-piece design, goes over existing lever.

• Beautiful high quality chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• Warning: For Off Road Use Only.
• LED light bar pre-installed.
• Fits most dual 4x6 headlight systems.
• US patent: D571,500 Canadian Industrial Design Registration: 123372 Mexico Design Patent: 27174.

• Original style reproduction with fog light hole.
• Precision punched mounting holes for inner reinforcement.
• OEM number: 21-27300-005, 21-27300-011.
• Inner reinforcement available separately, item # 20896.
• Passenger side application.

• Original style reproduction with fog light hole.
• Precision punched mounting holes for inner reinforcement.
• OEM number: 21-27300-004, 21-27300-010.
• Inner reinforcement available separately, item # 20895.
• Driver side application.

• Sold each, fits driver and passenger side.
• OEM part number: 21-27302-000.