United Pacific

• Projection headlight for Freightliner Columbia with beautiful chrome plated or black inner housing.
• Easy plug-in design, plugs into existing headlight wiring harness.
• DOT/SAE, FMVSS 108.
• Low beam: 9007 light bulb, 12V DC input, 4.3 amps/55 watt.
• High beam: 9007 light bulb, 12V DC input, 5.1 amps/65 watt.
• Amber turn signal light bulb (1157) included.
• Driver side application.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality plastic injection molded.
• Fits over standard 1-1/2" lug nuts on stud piloted wheel.
• Designed to cover up and hide the lug nut.
• Sold individually.

• Original style with easy to install threaded mounting inserts.
• Unique aerodynamic lens design.
• Low beam application: H11 light bulb, 12V DC input, 4.38 amps/55 watt.
• High beam application: HB3 (9005) light bulb, 12V DC input, 5 amps/55 watt.
• Turn signal: 3157 light bulb.
• Marker light: 914 bulb.
• DOT/SAE, FMVSS 108.

• Original design and fit.
• Impact resistant polycarbonate lens provide unparalleled protection from road hazards, with resistant lens.
• Easy plug-in design, plugs into existing headlight wiring harness.
• DOT/SAE, FMVSS 108.
• Shipped with 12V 65W HB3 high beam bulb, 55W HB4 low beam bulb, 3157AK turn signal bulb, and 168 type side marker bulb.

• Original design and fit.
• Impact resistant polycarbonate lens provide unparalleled protection from road hazards, with resistant lens.
• Easy plug-in design, plugs into existing headlight wiring harness.
• DOT/SAE, FMVSS 108.
• Shipped with 12V 65W HB3 high beam bulb, 55W HB4 low beam bulb, 3157AK turn signal bulb, and 168 type side marker bulb.

• Quality injection molded plastic for durability.
• Beautiful triple chrome plated finish.
• Easy installation, uses original mounting holes.
• Also fits T800/T600 (1986-2000).

• High quality polycarbonate lens with epoxy sealed circuit board.
• 12 volt, direct easy plug-in design with OEM style DT04-2P connector.
• DOT/SAE, FMVSS 108.
• IP67 water resistant rating.
• Replaces OE number 8073442, 85107907.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Fully sealed electronics, works on all 12V DC systems.
• Easy plug-in design with OEM style plug.
• Replacement for OE #A06-58770-000.
• DOT/SAE, FMVSS 108.
• IP67 water resistant rating.

• Beautiful chrome plated plastic.
• Use on single row of 7-rocker with 3 3 1 switch setup.
• Double sided tape pre-applied.

• High quality injection molded polycarbonate lens.
• Epoxy coated, fully sealed electronics designed for 12V DC systems.
• Easy installation with OE pattern mounting holes.
• Easy plug-in design with OEM style plug.
• Replacement for OE #20895320.
• Chrome OEM style bezel available separately, item #41625.
• IP67 water resistant rating.
• DOT/SAE, FMVSS 108.

• Replacement fifth wheel slide air cylinder hose.
• Cold temperature resistance 1/4" OD nylon-12 hose.
• Recoiled into smaller dimensions for easy storage, extends up to 10 feet.
• With 1/4" pipe male connector on each end.
• Meets DOT and SAE J844 Type-A specifications.

• Complete inner lamp bucket for United Pacific Peterbilt 359 dual headlight.
• Specifically for LED headlights, item # 31267.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• Only fits United Pacific front axle cover kit item # 10257, 10260 and 10262.

• High quality injection molded plastic with beautiful triple chrome plated finish.
• Replaces OE #20895320 LED side marker original black bezel.
• Chrome trim bezel for 36884. (Sold separately)

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Fully epoxy sealed electronics to resist corrosion and moisture.
• Unique patented GloLight design, US D736437.
• Fits most Kenworth W900 and T800.
• Fits existing Grakon 5000 style light housing.
• 2 wires (1 wire with ring terminal), works with any 12V DC system.

• Deluxe window crank base for Peterbilt and Kenworth.
• Deluxe kit includes: 1 deluxe chrome base and 1 spring.

• Heavy cutting of stainless, aluminum, cast iron and all ferrous metals.
• Each bar weight approximately 2.3 pounds.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• For passenger door equipped with power windows, door locks.
• Quality molded plastic with beautiful long lasting chrome plating.
• Fits first generation body style Freightliner Cascadia 08-17.
• Passenger side application.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.

• High quality chrome finish for durability and shine.
• Easy installation with pre-applied double sided tapes.
• Installation tip: apply small amount of RTV silicon glue inside four corners for a more secure fit.
• Fits OEM number R56-1158R.
• Passenger side application.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• Direct replacement for OEM control knob.
• Not compatible with 2nd generation T680.

• Chrome plastic 12" LED light bar housing only.
• Beautiful high quality chrome plated housing with triple chrome plating process.
• Fits United Pacific LED lights item # (38946b, 38947b, 38948b, 38949b, 39644b, 39645b, 39483b, 39484b, 39485b).
• For flush mount on any flat surface.
• Stainless steel mounting screws, can be move to accommodate mounting distance from 4 1/2"-7 3/8" apart.

• Chrome plastic toggle switch label cover for Kenworth.
• Available without visor.

• Square turn signal light with 21 X 2 amber LED 3 amber LED (side marker) universal design.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Fits both driver and passenger side.
• Chrome housing, single stud mounting.

• Mounts on side of sleeper for various Freightliner trucks.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• 15 amber LED with amber lens.
• Dual function with 3 wires (ground wire with ring terminal).
• Please note: this light only meets DOT/SAE P2 requirements for clearance/marker.

• 11 super bright LED strip light.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Red LED with clear lens.
• Mounting holes are 16 1/8" apart.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Rubber gasket included.
• Curved base design.
• Fits Peterbilt 359/379.

• For ultra fine finishing, non-abrasive, will not cut.
• Each bar weight approximately 2.3 pounds.

• Chrome plated finish with triple chrome plating process.
• For 2-1/2" X 1-1/16" switches.
• Fits various Freightliner Cascadia, Century, and Columbia.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Feature 21 bright LEDs.
• Unique reflector design, hard wired with 2 bullet plugs.

BROWN TRIPOLI ROUGE BAR

• Primary cutting of aluminum, brass copper, nickel, zinc and non-ferrous metal.
• Each bar weight approximately 2.3 pounds.

• High quality polycarbonate lens with epoxy sealed circuit board.
• Fits Peterbilt 387, and various other Peterbilt and Kenworth models.
• 12VDC, hard wired with 2 wires. White is ground, black is 12V .
• DOT/SAE, FMVSS 108.
• IP67 water resistant

• Restoration of high luster and mirror finish shine.
• Also removes burns, on chrome plating.
• Each bar weight approximately 2.3 pounds.

• Chrome plated finish with triple chrome plating process.
• Made of quality stamped steel.
• Sold individually.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Feature 21 bright LEDs.
• Unique reflector design, hard wired with 2 bullet plugs.
• Recommended plug: item #34203/34250.

• Chrome plastic spike push-on nut cover for hex nuts and bolts.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Fits over standard 1-1/2" lug nuts on stud piloted wheel.
• Designed to cover up and hide the lug nut.
• Sold individually.

• Beautiful chrome plated finish with triple chrome plating process.
• High quality zinc die-cast material.

• Chrome plastic spike push-on nut cover for hex nuts and bolts.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Fits over standard 33mm lug nuts on hub piloted wheels.
• Designed to cover up and hide the lug nut flange washer.
• Sold individually.

• Durable high quality chrome plated plastic.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Threads-on to 33mm wheel studs for a secure fit completely covers the lug nut & lug nut flange washer.

• Chrome plastic vinyl button cover for Kenworth.
• Beautiful high quality chrome plated housing and bezel with triple chrome plating process.
• Fits various Kenworth models and years.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality plastic injection molded.
• Chrome plastic bullet push-on nut cover for hex nuts and bolts.

• High quality polycarbonate lens with epoxy sealed circuit board.
• Bright dual function LEDs with unique lens design.
• 12VDC, hard wired with three .180" bullet plugs.
• DOT/SAE, FMVSS 108.
• IP67 water resistant.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality plastic with All other mounting screws, light bezels, and gaskets sold separately.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• 3 Knob set fits 2006 Kenworth W900, T800, T660, C500

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• Original design with mounting tabs, simply snaps into place.

• Chrome plated finish with triple chrome plating process.
• 2 piece set, includes top and bottom lever cover.
• Fits 2006 Kenworth W900, T800, T660 and T500.

• Quality injection molded plastic for durability.
• Durable injection molded plastic.
• Screw-on mount just like original Grote design.