United Pacific Categories
United Pacific
The 33mm Spike nut cover sits 4 1/8" tall fits lug nuts on Hub Piloted Wheels
United Pacific “Competition Series” Train Horn.
12V Heavy Duty Electric Solenoid Included
14 Amber LED Front Fender Cover For Peterbilt 388 (2008-2015) & 389 (2008-2023)-Amber Lens - Driver | Part Number: 32560 (32560)
- Chrome plastic Peterbilt front fender cover with 12" LED light bar.
- High quality chrome finish for durability and shine.
- Chrome plated finish with triple chrome plating process.
- Patent pending.
- Driver side application.
17 LED Dual Function Reflector Cab Light - Red LED/Red Lens | Part Number: 39321 (39321B)
- High quality polycarbonate lens with epoxy sealed circuit board.
- Bright LEDs with reflective inner housing.
- 12V DC, hard wired with three .180" bullet plugs.
- DOT/SAE, FMVSS108.
- IP67 water resistant.
2-Prong Male Bullet Plugs 16G Wire Harness Roll W/12" Lead Between Plugs - Sold Per Plug | Part Number: 34241 (34241)
- Sold per plug
- Waterproof over-molded plug housing.
- Quality insulated 16 gauge wire.
- Total 100' in length with 100 plugs spaced with 12" lead.
Chrome Plastic Cab Mounted Antenna Cover For PB 587 (2012-2021) And FL Cascadia (2011 & Older) | Part Number: 42306 (42306)
- Quality injection molded plastic for durability.
- Beautiful high quality chrome plated finish with triple chrome plating process.
- Original style design, direct replacement to original.
- Fits antenna assembly such as model #MASC2AP3 and A06-59350-000.
- Also fits 2000-2010 Peterbilt 387.
2-Prong Female Bullet Plugs 16G Wire Harness W/4" Lead Between Plugs - Per Plug | Part Number: 34194 (34194)
- Sold by each Plug
- Waterproof over-molded plug housing.
- Quality insulated 16 gauge wire.
- 0.180" female bullet type plug.
- Each roll is approximately 66' long, with 200 plugs.
- 4" lead between plugs.
Chrome Projection Headlight With LED Sequential Turn and DRL For 2012-2021 Peterbilt 579- Driver | Part Number: 35779 (35779)
- Projection headlight with LED position light and LED sequential turn signal.
- Patent Pending headlight lens design with reflective turn signal diffusers for wider visibility.
- Easy connection, plugs into existing wiring harness.
- DOT/SAE, FMVSS 108.
- Low beam: H7 Halogen Bulb, 12V DC Input, 55 Watt / 4.58 Amps.
- High beam: H7 Halogen Bulb, 12V DC Input, 55 Watt / 4.58 Amps.
- Also fits Peterbilt 587 (2010-2016).
19 LED 12" Reflector Turn Signal Light Bar - Amber LED/Clear Lens | Part Number: 39775 (39775B)
- High quality injection molded polycarbonate lens.
- Epoxy coated, fully sealed electronics.
- Energy efficient solid-state circuit board engineered for 12V DC systems.
- Feature 19 bright amber LEDs.
- Easy wiring with 3 hardwired wire leads.
- Mounting holes approximately 11-7/16" apart.
Chrome Passenger A/C Vent Trim For 2014-2022 Kenworth T680/T880 | Part Number: 41805 (41805)
- Quality injection molded plastic for durability.
- Beautiful chrome plated finish with triple chrome plating process.
- Beautiful chrome plating with triple chrome plating process.
- Easy installation, direct replacement of the original trim above passenger glove box.
19 Amber LED Grakon 2000 Style Cab Light Kit - Amber Lens | Part Number: 30675 (30675)
- Bright amber LED cab light with quality lens.
- Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
- Includes hardware and gasket, hard wired with two wires. White is ground, black is 12V .
- Fits Peterbilt 387, also fits various Peterbilt and Kenworth models.
- Pre-assembled with beautiful chrome plated plastic cab light housing.
- 19 LED Grakon 2000 cab light can be purchase separately, item # 39952.
Peterbilt Chrome Window Sill Replacement (Pair) | Part Number: 88006 (88006)
- Chrome aluminum window sill replacement for Peterbilt.
- Screws not included
Chrome Projection Headlight With LED Sequential Turn and DRL For 2012-2021 Peterbilt 579- Passenger | Part Number: 35780 (35780)
- Projection headlight with LED position light and LED sequential turn signal.
- Patent Pending headlight lens design with reflective turn signal diffusers for wider visibility.
- Easy connection, plugs into existing wiring harness.
- DOT/SAE, FMVSS 108.
- Low beam: H7 Halogen Bulb, 12V DC Input, 55 Watt / 4.58 Amps.
- High beam: H7 Halogen Bulb, 12V DC Input, 55 Watt / 4.58 Amps.
- Also fits Peterbilt 587 (2010-2016).
8" Stainless Dome Rear Hubcap | Part Number: 20202 (20202)
- Highly polished 304 premium grade stainless steel for durability and shine.
- Dome style rear hub cap.
- Fits most 8 stud with 5/8" diameter studs rear axle.
17 LED Dual Function Reflector Single Face Light - Red LED/Red Lens | Part Number: 39548 (39548)
- Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
- Fully sealed electronics, works on all 12V DC systems.
- Heavy duty chrome plated metal housing with stud mounting.
- Beautiful high quality chrome plated housing with triple chrome plating process.
- Easy wiring with 3 hardwired leads.
- For auxiliary or utility light application.
5 Even Notched Chrome Dome Front Hubcap - 7/16" Lip | Part Number: 10094 (10094)
- Chrome plated finish with triple chrome plating process
- 5 even notches
- Fits 8-23/32" hub bore
- Mounting clips included
- 7/16" lip
2-Prong Female Bullet Plugs 16G Wire Harness Roll W/12" Lead Between Plugs - Per Foot | Part Number: 34197 (34197)
- Sold by the foot/plug
- Waterproof over-molded plug housing.
- Quality insulated 16 gauge wire.
- 0.180" female bullet type plug.
- Each roll is approximately 100' long, with 100 plugs.
- 12" lead between plugs.
2-Prong Female Bullet Plugs 16G Wire Harness Roll 4 W/8" Lead Between Plugs - Per Plug | Part Number 34196 (34196)
- Sold Per Plug
- Waterproof over-molded plug housing.
- Quality insulated 16 gauge wire.
- 0.180" female bullet type plug.
- Each roll is approximately 100' long, with 150 plugs.
- 8" lead between plugs.
18" Vibrant Color 4 Spoke Steering Wheel - Cadmium Orange | Part Number: 88279 (88279)
- Premium automotive paint in vibrant candy colors, bold effects and dazzling color.
- High quality steel with chrome plating.
- Steering wheel only, commercial 3-bolt hub and horn button/bezel assembly available separately.
Mud Flap Hanger End Light Bracket Only 2" | Part Number: 10667 (10667)
- Chrome universal mud flap hanger end light bracket.
- Bracket only, fits 2" round light.
- Grommet needed for light installation, grommet sold separately
Zinc Single Face Housing Each | Part Number: 30929 (30929)
- Chrome single face light housing only.
- Quality die-cast housing with tirple nickel chrome plate finish.
- Single stud mounting with washers and nut.
- Specially designed to be used with United Pacific watermelon & beehive LED lights.
5 Notch Front Axle Cover With 1" Lip | Part Number: 10119 (E1121)
- Chrome plated finish with triple chrome plating process
- 5 even notches
- Fits 8-23/32" hub bore
- Mounting clips included
Universal front chrome axle cover 6 notch odd Part Number: E1130 (E1130)
Axle covers front: universal chrome front axle for all notches. When in doubt buy this one
33MM Lug Nut for ABS Front and Rear Sets | Part Number: 10064B (10064B)
33MM screw on chrome plastic lug nut cover for ABS front and rear sets. Needs 10259 tool
33mm Thread On Cylinder Nut Cover Part Number: 10013B (10013B)
Specifications:
- Chrome Plastic Thread-On Nut Covers
- Cylinder Shaped
- Fits Lug Nuts on Hub Piloted Wheels
- All Nut Covers are Flanged to Cover Up the Flange on the 33 mm Nut
Specifications:
| Product Dimensions | 33 mm x 3 1/2" |
| Warranty | 6 Months |
| Package | 1 Pc. |
Chrome Plastic Cylinder 33mm Thread on Nut-Covers
33 mm Thread On Spike Nut Cover With Flange Part Number: 10007B (10007B)
- Chrome plastic 33 mm thread-On spike nut covers
- Fits lug nuts on hub piloted wheels
- Flanged to cover up the flange
The 33mm Spike nut cover sits 4 1/8" tall fits lug nuts on Hub Piloted Wheels
Universal Lug Nut Cover Puller Part Number: 90008 (90008)
Heavy Duty Lug Nut Cover Puller with Vinyl Coated Grips for Steel Lug Nuts
Universal Application
2" Twist-On Bezel | Part Number: 33996 (33996)
Chrome Plastic 2" Twist-On Light Bezel
Insert 1 Tab Underneath the Grommet and Twist, the Other Tabs will Slide Under the Grommet
No Mounting Screws Required, For the Super Clean Look
4" Twist-On Bezel Part Number: 33998 (33998)
Chrome Plastic 4" Twist-On Light Bezel.
Insert 1 Tab Underneath the Grommet and Twist, the Other Tabs will Slide Under the Grommet
No Mounting Screws Required, For the Super Clean Look
Dual Rectangle Chrome Plastic Headlight Bezel with Visor and 14 Clear/Amber Led Lamps Part Number: 32352 (32352)
Dual rectangle chrome plastic headlight bezel with visor and 14 clear/amber lens led lamps
Peterbilt Speedo and Tach Bezel Part Number: 20554 (20554)
Chrome Plastic Bezel for Speedo And Tach On Prior To 2006 Peterbilt
8" white airway wheel Part Number: 90024 (90024)
Used for cutting and finishing cloth is biased cut to ensure maximum life 8" diameter, 16 ply, 5/8" & 1/2" arbor the folded design provides a balanced surface for uniform cutting over entire surface
8" yellow airway wheel Part Number: 90021 (90021)
8 inch yellow airway cut/finish wheel. Comes with solid center.
Buff wheel steel flange plates Part Number: 90015 (90015)
4" steel buff wheel holding plates. Sold as a pair.
Peterbilt speedo and tach bezel Part Number: 20554 (20554)
Chrome plastic bezel for speedo and tach on prior to 2006 peterbilt
Petrbilt 95+ a/c heater control knob Part Number: 41016 (41016)
Peterbilt 95+ a/c & heater control knob - imported
5" CURVED PLAIN BOTTOM EXHAUST - 24" long | Part Number: C1-5-024 (C1-5-024)
- Beautiful chrome plated finish with triple chrome plating process.
- Plain bottom exhausts are measured by the outer diameter.
- 5" curved plain bottom.
- Available in 24" length.
5in x 36in tip out chrome stack plain/gr Part Number: C1-5-036 (C1-5-036)
Import 5 x 36in tipout chrome stack plain bottom. To go into a muffler.
Rectangle cab light 17 led amber replacement light only Part Number: 39527 (39527)
17 led rectangle amber replacement light. Fits existing incandescent base with slight modification.
Chrome 3 Trumpet Competition Series Train Horn | Part Number: 46151 (46151)
Chrome 3 Trumpet “Competition Series” Train Horn 150db ± 10db*
12V Heavy Duty Electric Solenoid Included
Size: 15 ½" L x 11 ½" W x 10" H
Air Powered
Easy To Install
12V Heavy Duty Electric Solenoid Included
Size: 15 ½" L x 11 ½" W x 10" H
Air Powered
Easy To Install
United Pacific “Competition Series” Train Horn.
12V Heavy Duty Electric Solenoid Included
4" Chrome Air Horn Valve Set | Part Number: 46106 (46106)
- Chrome Air Horn Valve Set for Train Horns
- Air Horn Valve Lever and 4" Stand
27" Stainless Quarter Fender Set Part Number: 10809 (10809)
Stainless Quarter Fender with Triangle Bracket 430 Stainless Steel, 18 Gauge Internal Mounting System, Eliminate the Need for U-Bolts and Other External Hardware, Mounting Post Not Included. 24"x 27" Long. Includes top flap. Sold per Pair.
14in chrome flap weight Part Number: E1530 (E1530)
Flap weights: 14in chrome bottom flap weight with welded studs. Used on most pickup truck mud flaps. Per each
Kenworth Style Stainless Steel Grille bars 39 1/"2 for Peterbilt 359 & 379 | Part Number: 21161 (21161)
- Polished 304 premium grade stainless steel
- 39-1/2" long
- Includes Hardware (mounting bolts, lock washers and nuts)
- Sold each
- Fits Peterbilt 359 & 379
41" kenworth stainless grill bar Part Number: 21162 (21162)
Stainless steelflat top 41" center grill bar w/ hardware for kenworth
31 LED Peterbilt Turn Signal | Part Number: 38550 (38550)
31 led amber peterbilt turn signal
Halo Oval LED Light | Part Number: 37128 (37128)
22 LED 6" Oval S/T/T & P/T/C "Halo" Light Red LED with Red Lens Unique Patent Pending "Halo" Design, Halo Effect on Running, All LEDs Lit on Stop 3 Contact Female Terminal Lifetime Warranty.
19 LED Reflector Double Face Light Bar Part Number: 37944 (37944)
Chrome Plastic 19 LED 12" Double Face Light Bar with Reflector 3 Wires (Hard Wired), Double Stud Mounting One side RED/one side Amber 19 LED's per side.
Square Double Face Turn Amber/Red - Single Stud Mount LED Light - Driver's Side | Part Number: 38701 (38701)
- Driver Side
- Square turn signal light with 21 amber LED 3 amber LED (side marker) 21 red LED.
- Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
- Chrome housing, single stud mounting.
- 3 wires (1 wire with ring terminal).
- Amber & red LED with amber, red, clear lens.
- Sold individually
Square 45 l.e.d. Double face turn double stud fender mount driver side 3 wire Part Number: 38703 (38703)
Driver's side 2-sided square turn 45 diode l.e.d. Amber/red 2 stud fender mount, 3 wire. See 38704 for passenger side
Square l.e.d. Double face turn double stud fender mountpassenger side Part Number: 38704 (38704)
Square, 2 stud fender mount red/amber l.e.d. W/side marker - passenger side - see 38703 for driver side
2" Round Rubber Grommet | Part Number: 31505 (E2002)
2" Grommet - Flush Mount
