Pico
1 AWG Solid Copper Closed End Tubular 3/8" Ring Solder or Crimp Battery Cable Terminal | Part Number: 4839D (4839D)
Tubular Lug Rings are a seamless one-piece construction designed for heavy duty use. Terminals will not split apart when crimped. Insert stripped cable into end of Terminal. Terminals are flared for easy wire insertion & closed-end to facilitate the use of solder pellets. Use Lug Crimping tool or solder the connections. Can be used with pre-measured Solder Pellets to create a very strong and durable connection.
16-14 AWG Nylon Fully Insulated Tin-Plated Copper .250" Male Terminal 25 pcs | Part Number: 1864C (1864C)
Fully Insulated Male and Female Quick Connects, together provide a fast and secure wire connection where frequent disconnecting is needed. Quick Connectors slide easily together and pull apart with ease. Insert stripped wire into terminal barrel and crimp firmly. Flared insulation provides for easy wire insertion. When selecting mating connectors always choose terminals with same insulation design and same width.
16-14 AWG Nylon Fully Insulated Tin-Plated Brass .250" Female Terminal 50 pcs | Part Number: 1865C (1865C)
Fully Insulated Female and Male Quick Connects, together provide a fast and secure wire connection where frequent disconnecting is needed. Quick Connectors slide easily together and pull apart with ease. Insert stripped wire into terminal barrel and crimp firmly. Flared insulation provides for easy wire insertion. When selecting mating connectors always choose terminals with same insulation design and same width.
22-16 AWG Heat Shrink Butt Seamless Copper Connector w/Nylon Sleeve 100 pcs | Part Number: 2250A (2250A)
Seamless Barrel provides for a solid crimp with no barrel splitting. Wire Stop prevents over insertion of wire and flared sleeve provides for easy wire insertion. Translucent Nylon Heat Shrink Sleeve allows for visual inspection of correct wire placement and has a 30% faster shrink time. Insert stripped wire into each end of connector barrel & crimp firmly. Slowly apply heat (212?F) until inner adhesive wall of sleeve softens, melts filling voids, and outer wall shrinks. Cool for a permanent waterproof and corrosion resistant connection.
ATC/ATO Fuse Holder 16ga Black Wire 10 AMP (No Fuse) | Part Number: 0961C (0961C)
Cut Fuse Holder Wire Loop and splice into circuit needing to be fused. Easy removal and replacement of fuse if circuit should blow fuse. Fuse sold separately.
2/0 AWG Solid Copper Closed End Tubular 3/8" Ring Solder or Crimp - 15 Pack| Part Number: 4539C (4539C)
Tubular Lug Rings are a seamless one-piece construction designed for heavy duty use. Terminals will not split apart when crimped. Insert stripped cable into end of Terminal. Terminals are flared for easy wire insertion & closed-end to facilitate the use of solder pellets. Use Lug Crimping tool or solder the connections. Can be used with pre-measured Solder Pellets to create a very strong and durable connection.
Black 1/4" ID Split Convoluted Tubing Flexible Polyethylene 50ft | Part Number: 5140A (5140A)
Convoluted Tubing is highly flexible, resists gas and chemicals, and generally used to organize, protect and secure wire bundles, cables, hoses, etc. Split Black Tubing is suitable for use in automotive, computer/electronics, farm/agricultural, marine, recreation vehicles, telecommunications, construction, and specialty markets. Easily cut to desired length and side split allows for easy installation and wire breakout where needed but stays basically closed when twisted or bent.
On-Off-On Toggle SPDT Indicator Plate Die-Cast 3 Screw 1/2" Hole 6-12V 50A | Part Number: 5543C (5543C)
Toggle is one of the most commonly used switch styles, and a standard switch used on many different applications including automotive, marine and industrial. Non-Illuminated SPDT On-Off-On Toggle Switch has a 1" long Chrome Plated Bat Style Handle. Die Cast Housing with Indicator Plate. Includes 3 Copper Screw Terminals.
Waterproof On-Off Toggle Switch SPST 1/2" Hole 2 6" 16ga Leads 12V 25A | Part Number: 5588C (5588C)
Sealed SPST On-Off Toggle Switch includes a black Weather Resistant Boot to protect against any moisture or dust from entering the keyway. Switch body is encased in a Weather Resistant rubber coating. Toggle Switch has 2 6" 16 Gauge sealed wire leads. The 3/4" long metal Bat Style Handle is in a weather resistant boot. Toggle is one of the most commonly used switch styles and a standard for used on many different applications including automotive, marine and industrial.
Trailer Adapter 7-Way RV Blade Male Plug With 4-Way Flat Female 1/pk | Part Number: 6597PT (6597PT)
Adapter Plug Can be kept in tow Vehicle to make the Adapter change when Tow Vehicle with 7-Way Round Pin Connector is towing a trailer with a 4-Way flat.
11" UV Black Nylon Tie Wrap Zip Tie 100 pcs | Part Number: 7077E (7077E)
- 100 Pack
- 50 lbs Tensile Strength
- 11"
- Zip Tie
Standard Black Tie Wraps are suitable for most practical applications. Black Ties are UV resistant for a longer outdoor life. Ties are a one piece construction with curved tip for quick & easy install. Available in a range of sizes and tensile strength to meet every need.
14" UV Black Nylon Tie Wrap 120lb Tensile Strength - 100 Pack| Part Number: 7079A (7079A)
Heavy Duty Black Tie Wraps are suitable for most industrial applications where additional strength is needed. Black Ties are UV resistant for a longer outdoor life. Ties are a one piece construction with curved tip for quick & easy install. Available in a range of sizes and tensile strength to meet every need.
7" Cold Weather UV Black Nylon Tie Wrap 50lb Tensile Strength - 25 pack| Part Number: 7220C (7220C)
- 25 pack
- 50 lb Tensile Strength
Black Cold Weather Ties are manufactured specifically for cold weather applications with a rubber additive that allows Ties to be more flexible during installation. Ideal when Ties have been left out in the cold for an extended period of time such as overnight. Black Ties are UV resistant.
11" Cold Weather UV Black Nylon Tie Wrap 50lb Tensile Strength 25 pack| Part Number: 7221C (7221C)
- 11" Length
- 50 lbs Strength
- Rubber Additive Allows Nylon Ties To Remain Flexible For Installation at -4 degree F
- Allows For Installation When Ties Have Been at Cold Temps
- 100 Per Package
Black Cold Weather Ties are manufactured specifically for cold weather applications with a rubber additive that allows Ties to be more flexible during installation. Ideal when Ties have been left out in the cold for an extended period of time such as overnight. Black Ties are UV resistant.
2/0 GA Black Starter Cable Stranded Copper Conductor With PVC Jacket Price Per Foot | Part Number: 8099S (8099S)
Per Foot
Starter Cable is a rope stranded annealed pure copper conductor with a tough heat resistant PVC Jacket. Cable resist acids, oil, abrasions and environmental elements and is an extremely durable cable. Ideal for battery to switch, starter and ground cable.
4 GA Black Starter Cable Stranded Copper Conductor With PVC Jacket (per foot) | Part Number: 8104S (8104S)
Price per foot
Starter Cable is a rope stranded annealed pure copper conductor with a tough heat resistant PVC Jacket. Cable resist acids, oil, abrasions and environmental elements and is an extremely durable cable. Ideal for battery to switch, starter and ground cable.
3/4" ID Polyolefin Single Wall Black Shrink Tubing 6" - 4 pack | Part Number: 8224C (8224C)
Economical Heat Shrink Tubing for general purpose applications. Tubing provides an insulated, abrasion resistant and flame retardant covering. When cut and used over a terminated connection it acts a strain relief and helps prevent corrosion. Tubing is measured by it's inside diameter before shrinking. Cut desired length of tubing, slip over harness, wires, etc. Make the wire end connection and slide tubing back over connection. Slowly apply 230?F heat around tubing until it has shrunk completely around wire and connection. Cool for a tough insulated connection. Also available in Red for color coding.
Battery Terminal: 8 AWG Tin Plated Copper Brazed 1/4" Ring Solder or Crimp 5 pcs | Part Number: 4006D (4006D)
Brazed Lug Ring will not split apart when crimped. Insert stripped cable into end of Connector. Use Lug Crimping tool or solder the connections. Can be used with pre-measured Solder Pellets to create a very strong and durable connection.
Battery Cable Lug 8 AWG Tin Plated Copper Brazed 5/16" Ring Solder or Crimp 5 pcs | Part Number: 4008D (4008D)
Brazed Lug Ring will not split apart when crimped. Insert stripped cable into end of Connector. Use Lug Crimping tool or solder the connections. Can be used with pre-measured Solder Pellets to create a very strong and durable connection.
4 AWG Solid Barrel Tin Plated Copper Lug Connector | Part Number: 4200KT (4200KT)
Solid Barrel Lug Connectors will not split apart when crimped and provide a permanent connection from wire to wire. Insert stripped cable into each end of Connector. Use Lug Crimping tool or solder the connections. Tin plating provides corrosion resistance.
4 AWG Solid Copper Closed End Tubular 1/4" Ring Solder or Crimp Battery Terminal| Part Number: 4236D (4236D)
Tubular Lug Rings are a seamless one-piece construction designed for heavy duty use. Terminals will not split apart when crimped. Insert stripped cable into end of Terminal. Terminals are flared for easy wire insertion & closed-end to facilitate the use of solder pellets. Use Lug Crimping tool or solder the connections. Can be used with pre-measured Solder Pellets to create a very strong and durable connection.
2/0 AWG Solid Copper Closed End Tubular 3/8" Ring Solder or Crimp Battery Terminal | Part Number: 4539D (4539D)
Tubular Lug Rings are a seamless one-piece construction designed for heavy duty use. Terminals will not split apart when crimped. Insert stripped cable into end of Terminal. Terminals are flared for easy wire insertion & closed-end to facilitate the use of solder pellets. Use Lug Crimping tool or solder the connections. Can be used with pre-measured Solder Pellets to create a very strong and durable connection.
Grommet ID 25/64" Panel ID 21/32" Groove Width 1/8" Flexible Oil Resistant 5 pcs | Part Number: 6121D (6121D)
Grommets are inserted into pre-drilled holes in panels to eliminate sharp edges of the panel and protect pass-through wire, cable, conduit, etc. from being cut or frayed. Rubber Grommets are flexible to bend and slip into pre-drilled hole and collared edges of Grommet hold it in place. Grommets are measured first by Diameter of Grommet Hole, then Diameter of Pre-drilled Hole. Last measurement is Groove Width of Grommet which should also be the panel thickness to provide for a snug fit to panel.
Grommet ID 3/4" Panel ID 1-1/16" Groove Width 1/8" Flexible Oil Resistant - 2 pcs | Part Number: 6124D (6124D)
Grommets are inserted into pre-drilled holes in panels to eliminate sharp edges of the panel and protect pass-through wire, cable, conduit, etc. from being cut or frayed. Rubber Grommets are flexible to bend and slip into pre-drilled hole and collared edges of Grommet hold it in place. Grommets are measured first by Diameter of Grommet Hole, then Diameter of Pre-drilled Hole. Last measurement is Groove Width of Grommet which should also be the panel thickness to provide for a snug fit to panel.
4 GA Red Starter Cable Stranded Copper Conductor With PVC Jacket - Price per foot | Part Number: 8094S (8094S)
Price per foot, full roll is 50 feet.
Starter Cable is a rope stranded annealed pure copper conductor with a tough heat resistant PVC Jacket. Cable resist acids, oil, abrasions and environmental elements and is an extremely durable cable. Ideal for battery to switch, starter and ground cable.
Black UL Electrical Tape 3/4" x 60'/Roll | Part Number: 3460A (3460A)
Tru-Grip all weather PICO electrical tape generally used for insulating and protection of electrical wiring. Professional grade tape is ideal for applications requiring good adhesion with long lasting all weather durability. Over-wrap tape onto itself, slight stretching as you wrap to provide the best in adhesion and protection from the environment.
16-14 AWG Flared Vinyl Insl Tin-Plated Brass Butted Seam .187" Female 10 pcs | Part Number: 1851D (1851D)
Female and Male Quick Connects, together provide a fast and secure wire connection where frequent disconnecting is needed. Quick Connectors slide easily together and pull apart with ease. Insert stripped wire into terminal barrel and crimp firmly. Flared insulation provides for easy wire insertion. When selecting mating connectors always choose terminals of the same width.
Straight Barrel Battery Terminal Plated Solid Copper Crimp/Solder 1-2ga Neg | Part Number: 0830C (0830C)
Sold Individually
Top post replacement battery terminals feature copper construction for maximum power. Terminals are plated for corrosion resistance giving longer life to your battery cable. Terminals can be crimped or soldered. Each terminal comes with a nut and bolt giving tight connections to battery post for solid electrical contact. Before installing select the correct polarity and AWG gauge terminal for your battery cable. Recommend pre-measured Solder Pellet PICO #0622 when soldering. For additional weatherproofing Heat Shrink Tube can be added during installtion. Heat Shrink Tube also protects from corrision, can color code for polarity and acts as a strain relief on the connection.
Straight Barrel Battery Terminal Plated Solid Copper Crimp/Solder 1-2ga Positive | Part Number: 0829C (0829C)
Top post replacement battery terminals feature copper construction for maximum power. Terminals are plated for corrosion resistance giving longer life to your battery cable. Terminals can be crimped or soldered. Each terminal comes with a nut and bolt giving tight connections to battery post for solid electrical contact. Before installing select the correct polarity and AWG gauge terminal for your battery cable. Recommend pre-measured Solder Pellet PICO #0622 when soldering. For additional weatherproofing Heat Shrink Tube can be added during installtion. Heat Shrink Tube also protects from corrision, can color code for polarity and acts as a strain relief on the connection.
3-Way Molded Trailer Connector 16 AWG Wire Male & Female | Part Number: 0711P (0711P)
Molded Trailer Connectors are to be cut, with Male End spliced into Vehicle wiring and Female End spliced into Trailer wiring. Both Male & Female Ends are polarized for easy wire identification. Connectors are durable and water resistant for use where an environmentally protected connection is desired.
Universal Double Contact Pigtail With Fiber Washer 2-18ga Leads 1 pc | Part Number: 5421C (5421C)
OEM Style Socket Assembly Replacements. Socket Connector and Harness can become corroded, worn and damaged through the years and in need of replacement. Remove old Connector from vehicle wiring harness and splice in new Pigtail with butt splice connectors. Butt splice connectors sold separately.
6" Black Tie Wrap 50lb Tensile Strength 100 pcs | Part Number: 7076E (7076E)
Standard Black Tie Wraps are suitable for most practical applications. Black Ties are UV resistant for a longer outdoor life. Ties are a one piece construction with curved tip for quick & easy install. Available in a range of sizes and tensile strength to meet every need.
8" Black Heavy Duty Nylon Tie Wrap 120lb Tensile Strength - 100 Pack| Part Number: 7104A (7104A)
Heavy Duty Black Tie Wraps are suitable for most industrial applications where additional strength is needed. Black Ties are UV resistant for a longer outdoor life. Ties are a one piece construction with curved tip for quick & easy install. Available in a range of sizes and tensile strength to meet every need.
24" Heavy Duty Nylon Tie Wrap 175lb Tensile Strength - 50 pcs | Part Number: 7105A (7105A)
Heavy Duty Black Tie Wraps are suitable for most industrial applications where additional strength is needed. Black Ties are UV resistant for a longer outdoor life. Ties are a one piece construction with curved tip for quick & easy install. Available in a range of sizes and tensile strength to meet every need.
1/2" ID Rubber Insulated Steel Clamp 3/8" Mount Hole - 10 pack | Part Number: 7516C (7516C)
Rubber Insulated Clamps are ideal for securing suspended cables, circuits, pipes, hoses, etc. The flexible clamps adapt to fit snugly, holding lines firmly in place while protecting from shock, abrasion and vibration. Clamps are measuring by inside diameter of clamp when closed. The zinc plated steel clamps are strong, durable and long lasting, in a variety of sizes to fit any type of mounting application.
16-14 AWG Heat Shrink Butt Seamless Copper Connector w/Nylon Sleeve 100 pcs | Part Number: 2260A (2260A)
Seamless Barrel provides for a solid crimp with no barrel splitting. Wire Stop prevents over insertion of wire and flared sleeve provides for easy wire insertion. Translucent Nylon Heat Shrink Sleeve allows for visual inspection of correct wire placement and has a 30% faster shrink time. Insert stripped wire into each end of connector barrel & crimp firmly. Slowly apply heat (212?F) until inner adhesive wall of sleeve softens, melts filling voids, and outer wall shrinks. Cool for a permanent waterproof and corrosion resistant connection.
3/8 Stainless Steel Hold Down Nut for Group 31 Batteries 9/16 Hex Head | Part Number: 0852A (0852A)
Sold Individually
Stud-Mount Battery Terminal Nut is used to attach battery cables to 3/8" stud mount batteries. Can be used on both Stud Mount and Side Mount Batteries.
1/2" ID Polyolefin Single Wall Black Shrink Tubing 4 6" pcs | Part Number: 8223C (8223C)
Economical Heat Shrink Tubing for general purpose applications. Tubing provides an insulated, abrasion resistant and flame retardant covering. When cut and used over a terminated connection it acts a strain relief and helps prevent corrosion. Tubing is measured by it's inside diameter before shrinking. Cut desired length of tubing, slip over harness, wires, etc. Make the wire end connection and slide tubing back over connection. Slowly apply 230F heat around tubing until it has shrunk completely around wire and connection. Cool for a tough insulated connection. Also available in Red for color coding.
16-14 AWG Flared Vinyl Insulted Tin-Plated Copper Butted Seam Butt Connector 12 pcs | Part Number: 1800D (1800D)
Butt Splice Connectors provide a permanent insulated connection from wire to wire. Insert a stripped wire into each end, firmly crimping connector over each wire end. Flared insulation provides for easy wire insertion.
16-14 AWG Heat Shrink Butt Seamless Copper Connector w/Nylon Sleeve 5 pcs | Part Number: 2260C (2260C)
Seamless Barrel provides for a solid crimp with no barrel splitting. Wire Stop prevents over insertion of wire and flared sleeve provides for easy wire insertion. Translucent Nylon Heat Shrink Sleeve allows for visual inspection of correct wire placement and has a 30% faster shrink time. Insert stripped wire into each end of connector barrel & crimp firmly. Slowly apply heat (212?F) until inner adhesive wall of sleeve softens, melts filling voids, and outer wall shrinks. Cool for a permanent waterproof and corrosion resistant connection.
7-Pole Plastic RV Blade Female Trailer Connector Socket Mates With #0706 | Part Number: 0707P (0707P)
Trailer Connectors offer a convenient way to connect tow Vehicle wiring to Trailer. Vehicle Side Female Socket is easily disassembled for connecting into current wiring harness. Labeled to current industry standards for help in wiring to correct function. Polarized for easy match to Trailer Side Male Plug. Spring-loaded socket cover locks plug into place when in use ensuring positive connection, prevents accidental plug disengagement, and keeps connector clean when not in use. Durable construction for secure electrical connection between your vehicle and trailer.
7-Pole Plastic RV Blade Male Trailer Connector Plug Mates With #0707 | Part Number: 0706P (0706P)
Trailer Connectors offer a convenient way to connect tow Vehicle wiring to Trailer. Trailer Side Male Plug Connector is easily disassembled for connecting into current wiring harness. Labeled to current industry standards for help in wiring to correct function. Polarized for easy match to Vehicle Side Female Socket. Dual handle design for easy removal. Durable construction for secure electrical connection between your vehicle and trailer.
Universal Sealed Beam Headlight 3-Prong Flasher Bulb 9003 & H4 3-14ga Leads 1 pc | Part Number: 5407C (5407C)
OEM Style Socket Assembly Replacements. Socket Connector and Harness can become corroded, worn and damaged through the years and in need of replacement. Remove old Connector from vehicle wiring harness and splice in new Pigtail with butt splice connectors. Butt splice connectors sold separately.
Sealed ATC/ATO Auto Fuse Holder 12ga Orange Wire Use With 3 - 30 AMP Fuse | Part Number: 0950C (0950C)
Splice wires into circuit needing to be fused. Easy removal and replacement of fuse if circuit should blow fuse. Weatherproof construction of fuse holder with rubber seal of latching cap provides extra protection against water and dust. Fuse Holder is mountable. Fuse sold separately.
4 GA Gray Solder Pellets 10 pcs | Part Number: 0620C (0620C)
Solder Pellets provide maximum conductivity and corrosion resistance by creating a strong bond between cable strands and terminal. Eliminates need for expensive crimping tool. Select correct pellet according to gauge of your cable. Drop pellet into terminal & apply heat to melt solder. Insert stripped cable and as solder melts exposed wire strands sink into terminal until cable insulation butts up against terminal end. Cool for a strong permanent bond.
Black 1/2" ID Split Convoluted Tubing Flexible Polyethylene 50ft | Part Number: 5142A (5142A)
Convoluted Tubing is highly flexible, resists gas and chemicals, and generally used to organize, protect and secure wire bundles, cables, hoses, etc. Split Black Tubing is suitable for use in automotive, computer/electronics, farm/agricultural, marine, recreation vehicles, telecommunications, construction, and specialty markets. Easily cut to desired length and side split allows for easy installation and wire breakout where needed but stays basically closed when twisted or bent.
Low Beam Headlight Connector Halogen Bulbs 9006 & H4351 2-18ga Leads 1 pc | Part Number: 5462C (5462C)
OEM Style Socket Assembly Replacements. Socket Connector and Harness can become corroded, worn and damaged through the years and in need of replacement. Remove old Connector from vehicle wiring harness and splice in new Pigtail with butt splice connectors. Butt splice connectors sold separately.
On-Off Toggle Illuminated LED Amber SPST Switch 1/2" Hole 1/4" Tabs 12V 10A | Part Number: 5562C (5562C)
Illuminated SPST On-Off Toggle Switch has a 1" long Bat Style Handle that Tip illuminates with a LED light when On. Toggle is one of the most commonly used switch styles. A standard switch used on many different applications including automotive, marine and industrial. Three 1/4" male tabs for easy installation.
Fog/Corner Lamp & Speed Sensor Pigtail 2-18ga Leads GM 12085498 & 12043215 | Part Number: 5638C (5638C)
Replacement GM Sensor Pigtails. Maintain the optimal operation of your vehicle by choosing correct replacement pigtails. Select correct replacement, remove old connector and splice in new Connector Pigtail with butt splice connectors. Butt splice connectors sold separately.
14" Black Nylon Tie Wrap 50lb Tensile Strength - 50 pcs | Part Number: 7078E (7078E)
Standard Black Tie Wraps are suitable for most practical applications. Black Ties are UV resistant for a longer outdoor life. Ties are a one piece construction with curved tip for quick & easy install. Available in a range of sizes and tensile strength to meet every need.
