Philllips
Tender Spring 16" | Part Number: 17-116 (17-116)
Phillips 16" Replacement Tender Spring
- For use with trailers with sliding axles
- Supports air lines to rear axle
Tracker Spring Kit with 16" Dual Springs | Part Number: 17-420 (17-420)
Coiled cable spring kit with 16" dual springs, with QWIK-SNAP™
- Kits include snap-on clip, PVC sleeve, spring(s) and 3-hose holder
- Ideal for ABS cable use
- QWIK-SNAP™ patented “scissor” design allows cable/hose replacement in seconds!
Step Down Butt Blue 10Pkg | Part Number: 1-1728 (1-1728)
- 22-18 ga. to 16-14 ga
- Blue
- Package of 10
- Crimp provides mechanical reliability for excellent conductivity
- Seal prevents wire corrosion … Keeps out moisture and road salts
- RoHS compliant
Butt Connector Blue 16-14 Pkg Of 25 | Part Number: 1-1862 (1-1862)
- 16-14 gauge
- Blue
- Package of 25
- Crimp provides mechanical reliability and holds wires in place for soldering
- Solder flows into window to solder wire to connector
- Solder provides maximum tensile strength and conductivity
- Seal prevents wire corrosion … Keeps out moisture and road salts
- CRIMP, SOLDER & SEAL connectors meet or exceed the most stringent OEM standards
Butt Connectors 20-18 Gauge - 25 Pack | Part Number: 1-1863 (1-1863)
Butt Connectors 20-18 Gauge
- Crimp provides mechanical reliability and holds wires in place for soldering
- Solder flows into window to solder wire to connector
- Solder provides maximum tensile strength and conductivity
- Seal prevents wire corrosion … Keeps out moisture and road salts
- CRIMP, SOLDER & SEAL connectors meet or exceed the most stringent OEM standards
Step Down Butt Connectors 16-14 ga. to 12-10 ga. 10Pkg | Part Number: 1-1727 (1-1727)
- 16-14 ga. to 12-10 ga.
- Yellow Color
- Crimp provides mechanical reliability for excellent conductivity
- Seal prevents wire corrosion … Keeps out moisture and road salts
Glad Hand Grips Aluminum | Part Number: 12-600 (12-600)
Coiled Air Gladhand Extensions
- Blue and Red Pair
- Provides strong leverage for couling/uncoupling gladhands
- Durable and strong; made of solid machined aluminum
- One-piece body for easy installation
- Bright, corrosion-resistant anodized color coating
- Easy installation – Installs between aircoil and gladhand
- Heavy diamond knurl for outstanding grip
40" Chrome Pogo Stick | Part Number: 17-0400 (17-0400)
40" Chrome Pogo Stick
- Designed for heavier ABS cables
- Extra heavy duty internal spring
- Can accept STOW-A-WAY™ (15-041, 15-042), needs 17-039 mounting kit
- Aircraft quality mounting bolt
- Includes QWIK-SNAP™ 3-hose holder
- 8 in. coated spring for corrosion resistance
- Heavy-duty 7/16″ mounting bolt
6-2Ga Black 6" Shrink Tube 6Pc | Part Number: 6-304 (6-304)
- Waterproof seal and insulates
- Adhesive lined cross-linked polyolefin
- 8-6 ga., black, six/ 6" pcs.
- Dielectric strength: 700V
2 Hose Separator for 3/8" Hose | Part Number: 17-150 (17-150)
- 2-hose separator, 3/8" hose
- Keeps nylon air hoses secure and out of the way
- For tractor coil air, trailer slider hose applications
6-2Ga 6" Red Shrink Tube | Part Number: 6-211C (6-211C)
- 6-2Ga Red 6" Shrink Tube
- Waterproofs, seals and insulates
- Adhesive lined cross-linked polyolefin
- Color-coded for polarity identification
- Dielectric strength: 500V
Stow-A-Way Gladhand & Plug Holder | Part Number: 15-042 (15-042)
- STOW-A-WAY™ offers safe, easy storage for coiled electrical cable, liftgate cables and air lines when not in use
- Corrosion resistant and extremely durable
- Air and electrical can be coupled/uncoupled with both feet on the ground
- Angled for easy access
4 Wire Socket with P-Shaped Lid | Part Number: 15-400 (15-400)
- Heavy duty, zinc die-cast housing for durability
- Elongated holes for mounting adaptability
- Stainless steel hinge pin and spring for long life
- Full-opening P-shaped lid
- Reduce exposure to contaminants and moisture, use socket boot 15-640
- Closed back design
Nose Box Metal | Part Number: 15-775 (15-775)
Zinc Die-Cast Nosebox
- 3 1/8" deep - Fits 15 or 16 series socketbreakers
- 55% more interior space than the 15-769
- Larger interior space allow for easier access & maintenance
- 3 1/8″ deep
- Fits 15 series and 16 series socketbreakers
- Standard hole pattern
- Kit includes gasket, grommet and socketbreaker mounting hardware
- Does not include nosebox mounting hardware
Dual Pole Socket | Part Number: 15-326 (15-326)
- Zinc die-cast housing for durability
- Solid brass pins
- Elongated holes for mounting adaptability
- Stainless steel hinge pin and spring for long life
- 1/4 in. stud size for lugs
- 150 amp continuous capacity; 200 amp intermittent capacity
- Mates with 15-336 dual pole plug
Plug 7 Pin ISO Yellow | Part Number: 15-830 (15-830)
- Replacement plug for ISO 3731 coiled and straight cables
- Heavy duty, reinforced zinc die-cast housing for durability
- Male ground pin to prevent mis-connection
- Strong cable guard to support heavy cables
- 15-731 replacement cable guard
- 16-811 replacement insert
3-Hose Holder, .75" Hole Size | Part Number: 17-157 (17-157)
- 3-Hose Holder
- 3/4" O.D.
- Zinc-plated hardware
- 2-piece ABS clamp
Rubber Gladhand Seal | Part Number: 80-012 (80-012)
Black Rubber Gladhand Seal
Sold Individually
Service Gladhand Blue Straight Mount | Part Number: 12-006 (12-006)
- Wrap-around connector plate provides additional strength
- Powder-coated connector plate for corrosion resistance
- Zinc-coated detent plate
- E-coated screws for corrosion protection
- Meets SAE J318 specifications
- Stainless steel detent plates and connector plates available, please contact customer service
- Service and emergency keyed to prevent cross coupling
2/16 Gauge Jacketed Parallel Wire | Part Number: 2-401 (2-401)
- 2/16 ga., jacketed.
- 100' full spool.
14 Gauge Yellow Primary Wire | Part Number: 2-127 (2-127)
- 14G Yellow Primary Wire
- 100 ' spool
- SAE type GPT (General Purpose Thermoplastic) wire
- Resists acids, greases, oils, fuels
- Good abrasion resistance
- Soft annealed copper conductors for flexibility
- Concentric jacketing allows for easy wire stripping
- Meets SAE J1128, type GPT
Tender Spring Assembly Single 20" | Part Number: 17-148 (17-148)
- Coiled cable spring kit with 20" heavy-duty spring, with U-bolt holder
- Replacement spring and hardware for tracker bars
- Kits include snap-on clip, PVC sleeve, spring(s) and 3-hose holder
- Ideal for ABS cable use
- QWIK-SNAP™ patented “scissor” design allows cable/hose replacement in seconds!
5th Wheel 60" Sliding Coil Air | Part Number: 11-302 (11-302)
- Brass end for durability
- Industry standard nylon tubing
- Extra long spring for strain relief
- 60” extension with 1/4” quick connect swivel and coil protector
30" Sliding Air Brake Coil | Part Number: 11-303 (11-303)
36” extension with 1/4” male pipe thread
Junction Box 7 Pole Clear Casing | Part Number: 15-961 (15-961)
Quick and easy trailer wiring management
Surface Mount Shutoff Gladhand Red Emergency | Part Number: 12-338 (12-338)
Red Emergency Gladhand
Prevents debris from entering air system
7-Way Zinc Die-Cast Socket | Part Number: 15-720 (15-720)
2-hole, wire insertion, split pin
7-Way Sockets
Reinforced zinc die-cast housing for durability
STA-DRY® Wire Insertion Socket 2 Hole | Part Number: 16-720 (16-720)
- 2-hole, wire insertion, split pin
- Inner cavity sealed to prevent contaminants from passing to wire harness
- Non-corrosive housing: resists magnesium chloride, salt, oils, grease, and fuels
- Extended front barrel for additional cable support, slanted 5° for moisture drain
- Unbreakable housing and lid, with stainless steel hinge pin and spring
- Meets SAE J560 specifications
- Split brass pins for superior conductivity
- Thread sealed screws prevent wire pull-out
- For added protection against moisture, use socket boot Part Number: 15-740
7-Way Zinc Die-Cast Plug | Part Number: 15-730 (15-730)
7-Way Zinc Die-Cast Plug
- Zinc Die-Cast Connectors
- Reinforced zinc die-cast housing for durability
- Thread sealed screws prevent wire pull-out
- Spring-wrapped, machine crimped brass compression pins
- Heavy-duty, reinforced zinc die-cast housing
- Strong cable guard to support heavy cables
7 Pin Socket 2 Hole Mount | Part Number: 16-722 (16-722)
- 2-hole, ring termination, split pin
- Inner cavity sealed to prevent contaminants from passing to wire harness
- Non-corrosive housing: resists magnesium chloride, salt, oils, grease, and fuels
- Extended front barrel for additional cable support, slanted 5° for moisture drain
- Unbreakable housing and lid, with stainless steel hinge pin and spring
- Split brass pins for superior conductivity
- For added protection against moisture, use socket boot P/N 15-740
- For solid pin sockets, please contact customer service
- Accepts #8 ring terminals
7 Pin Socket | Part Number: 16-726 (16-726)
- 7 Pin Socket
- 2-hole, bullet with locking clip for Phillips QCS®
- For use with standard ABS wiring systems
- For use with most OEM configurations
Red (Emergency) Angled GladHand | Part Number: 12-138 (12-138)
- Emergency, red, bottom port, 3/8” female pipe thread
- Wrap-around connector plate provides additional strength
- Powder-coated connector plate for corrosion resistance
- E-coated screws for corrosion protection
- For use on trailer
7-Way Zinc Extension Socketbreaker | Part Number: 15-762 (15-762)
- 7-Way Zinc Extension With 20 amp circuit breakers, split pin
- Stainless steel hinge pin and spring
- Full-opening lid
- STA-DRY® feature seals to prevent moisture and contaminants from entering the harness system
- Raised interior ribs for moisture exit
- Includes neoprene closed cell sponge mounting gaskets
- Designed to support ABS cable weight
- Allows up to 5 ground circuits
Electrical 7 Way 30Amp Breaker | Part Number: 15-763 (15-763)
7-Way Extended Barrel
- Stainless steel hinge pin and spring
- Full-opening lid
- STA-DRY® feature seals to prevent moisture and contaminants from entering the harness system
- Raised interior ribs for moisture exit
- Includes neoprene closed cell sponge mounting gaskets
- Designed to support ABS cable weight
- Circuit breaker designed to be serviced in 30 seconds
- Allows up to 5 ground circuits
- With 30 amp circuit breakers, split pin
Phillips Socket Breaker Blank | Part Number: 15-760 (15-760)
Phillips Socket Breaker Blank
- Without circuit breakers, split pin
- Stainless steel hinge pin and spring
- Full-opening lid
- STA-DRY® feature seals to prevent moisture and contaminants from entering the harness system
- Raised interior ribs for moisture exit
- Includes neoprene closed cell sponge mounting gaskets
- Designed to support ABS cable weight
Universal Gladhand | Part Number: 12-010 (12-010)
Straight Mount Universal Gladhand
- Universal, 1/2” female pipe thread
- Wrap-around connector plate provides additional strength
- Powder-coated connector plate for corrosion resistance
- Zinc-coated detent plate
- E-coated screws for corrosion protection
- Meets SAE J318 specifications
- Stainless steel detent plates and connector plates available, please contact customer service
Blue Service Angled Gladhand | Part Number: 12-136 (12-136)
- Service, blue, bottom port, 3/8” female pipe thread
- Wrap-around connector plate provides additional strength
- Powder-coated connector plate for corrosion resistance
- E-coated screws for corrosion protection
- For use on trailer
Dummy Shut-Off Glad Hand | Part Number: 12-0100 (12-0100)
- Seals rear gladhands for double trailers
- Inexpensive way to seal rear gladhands for double trailers
- provides air-tight shut-off
- 18 in. cable with ring terminal
Emergency Gladhand Red Straight Mount | Part Number: 12-008 (12-008)
Emergency, Red, 1/2” female pipe thread
- Wrap-around connector plate provides additional strength
- Powder-coated connector plate for corrosion resistance
- Zinc-coated detent plate
- E-coated screws for corrosion protection
- Meets SAE J318 specifications
- Stainless steel detent plates and connector plates available, please contact customer service
- Service and emergency keyed to prevent cross coupling
Black Trailer Wire 4 Cond 14G - Sold by the foot | Part Number: 3-192 (3-192)
SOLD PER FOOT
- Black Trailer4 conductor, 14 ga.
- 100' full spool
- Resistant to chemicals, oils, and fuel
- Paper wrapped for ease of stripping
- Concentric jacketing – copper centered in jacket for consistent abrasion resistance
- Superior abrasion resistance
20' Red Heavy Duty Air Coil | Part Number: 11-321 (11-321)
Heavy Duty Red 20' Air Coil
- Includes thread seal for secure connection to gladhand
- Single piece trailer side and three-piece swivel tractor side fittings
- Plated steel spring for added tubing protection
- Remains flexible at -40°F (-40°C)
- Meets SAE J844 and J1131 specifications
- Meets DOT 49 CFR FMVSS 571.106 specifications
- Meets DOT 49 CFR FMVSS 393.45 specifications
- AS a recommended practice, use a tracker bar spring kit or pogo stick to support cable assemblies with longer leads
Nose Box Kit | Part Number: 16-775 (16-775)
- Single cavity nosebox kit, 3 1/2” deep with gasket
- Non-corrosive nylon housing
- For use with 15 series or 16 series socketbreakers
- Impact-resistant
- Steel reinforced mounting collars
- Kit includes grommet and socketbreaker mounting hardware
15' Straight ABS Lectraflex | Part Number: 30-2071 (30-2071)
- Length 15 feet
- Zinc die-cast plugs
- Spring-wrapped compression contact pins
- Chemical and abrasion resistant
- QCP™ cartridge is field replaceable
- PERMAPLUG™ seal blocks contaminants from entering the electrical system
- Flexible from -40°F to 150°F (-40°C to 66°C)
Tire Inflator with Gladhand | Part Number: 11-301 (11-301)
- For use on trucks with air brake systems
- 50 ft. straight PVC air hose reaches all tires
- Includes universal gladhand (12-010) and air chuck
Black Trailer Cable 7 Wire - Sold By the Foot | Part Number: 3-223 (3-223)
7 conductor, 6/12 & 1/10 ga.,
- Sold by the Foot - Full Spool 250'
- Resistant to chemicals, oils, and fuel
- Paper wrapped for ease of stripping
- Concentric jacketing – copper centered in jacket for consistent abrasion resistance
- Superior abrasion resistance
- Stays flexible to -40°F (-40°C)
- Meets SAE J1128 specifications
Dual Cavity Nosebox with backplate | Part Number: 16-777 (16-777)
- Dual cavity nosebox kit
- 3 1/2” deep with backplate
- Non-corrosive nylon housing
- For use with 15 series or 16 series socketbreakers
- Impact-resistant
- Steel reinforced mounting collars
- Kit includes grommet and socket breaker mounting hardware
15' Red (Emergency) Coil Only, with 40'' Lead | Part Number: 11-338 (11-338)
15' Red (Emergency) Coil Only, with 40'' Lead
- Includes thread seal for secure connection to gladhand
- Single piece trailer side and three-piece swivel tractor side fittings
- Plated steel spring for added tubing protection
- Remains flexible at -40°F (-40°C)
- Meets SAE J844 and J1131 specifications
- Meets DOT 49 CFR FMVSS 571.106 specifications
- Meets DOT 49 CFR FMVSS 393.45 specifications
- AS a recommended practice, use a tracker bar spring kit or pogo stick to support cable assemblies with longer leads
15' Blue (Service) Coil Only | Part Number: 11-318 (11-318)
15' Blue (service) coil only
- Includes thread seal for secure connection to gladhand
- Single piece trailer side and three-piece swivel tractor side fittings
- Plated steel spring for added tubing protection
- Remains flexible at -40°F (-40°C)
- Meets SAE J844 and J1131 specifications
- Meets DOT 49 CFR FMVSS 571.106 specifications
- Meets DOT 49 CFR FMVSS 393.45 specifications
- AS a recommended practice, use a tracker bar spring kit or pogo stick to support cable assemblies with longer leads
Cable Assembly 15' Liftgate Single Pole | Part Number: 23-4625 (23-4625)
15 foot Coil, 1 hot, 4 ga.
- Durable single pole coiled assemblies
- Good recoil memory, chemical and abrasion resistance
- Flexible from -87°F to 150°F (-66°C to 66°C)
- Heavy-duty, reinforced zinc die-cast housing
- Mates with single pole metal socket 15-320
- As a recommended practice, use a tracker bar spring kit or pogo stick to support cable assemblies with longer leads
Permacoil 12' W/2 Zinc Plugs | Part Number: 22-4321 (22-4321)
- 12’, with zinc die-cast plugs, 1/10 & 6/12 ga.
- For standard 7-way applications, NON-ABS equipped trailers w/ minimal voltage demands
- Flexible from -87°F to 150°F (-66°C to 66°C)
- Good recoil memory, chemical & abrasion resistance
- QCP™ cartridge is field replaceable in under two minutes!
- WEATHER-TITE™ PERMAPLUG™ seal blocks contaminants from entering the electrical system
- As a recommended practice, use a tracker bar spring kit or pogo stick to support cable assemblies with longer leads
- For standard 7-way applications, NON-ABS equipped trailers w/ minimal voltage demands
- Flexible from -87°F to 150°F (-66°C to 66°C)
- Good recoil memory, chemical & abrasion resistance
- QCP™ cartridge is field replaceable in under two minutes!
- WEATHER-TITE™ PERMAPLUG™ seal blocks contaminants from entering the electrical system
- As a recommended practice, use a tracker bar spring kit or pogo stick to support cable assemblies with longer leads