United Pacific

• Chrome plated finish with triple chrome plating process
• Chrome plastic spinner
• 2-bar California "groovy" style
• Mounts with 5/16-18 thread

• Beautiful high quality chrome plated finish with triple chrome plating process.
• Fits over standard 33mm lug nuts on hub piloted wheels.
• Designed to cover up and hide the lug nut flange washer.
• Chrome plastic 33mm push-on slotted nut cover.
• Sold individually.

• Chrome plated finish with triple chrome plating process
• Plain bottom exhausts are measured by the outer diameter
• 5" curved plain bottom
• 18" length

• Quality steel housing with beautiful chrome plating.
• Design specifically for use with 2" grommet and 2" round lights.
• Easy installation with 2 mounting holes, 1-13/16" center to center spacing (screws not included).

• Bezel for round cab lights.
• Available without visor.

• Stainless Steel Pete OEM Style Grille Bar.
• With Mounting Hardware 34 x 1-3/4".
• For Peterbilt OEM Style & Size.

• Reinforced aluminum reflector, rugged anti-vibration construction.
• Sylvania halogen bulb: H4/HB2-12V 60/55W.
• Direct replacement to sealed beam type headlights, H6054.

• Black rubber grommet for oval light.
• Provides lamps with additional shock and vibration resistance.

• Quality die-cast with beautiful chrome plated finish.
• Feature solid heavy duty 40-spline hub.
• Includes chrome aluminum horn button and horn bezel.
• Horn contact plate and mounting hardware to horn bezel included.
• Design specifically for use with United Pacific 3-bolt steering wheels.
• Install instructions included and available online as digital download.

• Heavy duty chrome plated metal housing with stud mounting.
• Beautiful high quality chrome plated finish with triple chrome plating process.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Works with any 12V DC system.
• For auxiliary or utility light application, 2 wires (hard wired).
• 5/8"-11 mounting stud with matching fasteners included.

• Projection type headlight with dual function LED light bar.
• Also fits: Peterbilt 387 (1999-2010), 382 (2007-2018), & 384 (2007-2014).
• DOT/SAE, FMVSS 108.
• Low beam: H7 light bulb, 12V DC input, 4.17 amps / 50.04 watt, FMVSS 571.
• High beam: H1 light bulb, 12V DC input, 4.32 amps / 51.84 watt, FMVSS 571.
• Turn signal: 3157 light bulb.

• Projection type headlight with dual function LED light bar.
• Also fits: Peterbilt 387 (1999-2010), 382 (2007-2018), & 384 (2007-2014).
• DOT/SAE, FMVSS 108.
• Low beam: H7 light bulb, 12V DC input, 4.17 amps / 50.04 watt, FMVSS 571.
• High beam: H1 light bulb, 12V DC input, 4.32 amps / 51.84 watt, FMVSS 571.
• Turn signal: 3157 light bulb.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality injection molded plastic for durability.
• Only fits United Pacific front axle cover kit item # 10257, 10260 and 10262.

• Glossy sticker for air valve knobs, sticker only.
• Beautiful chrome lettering with special clear resin top surface.

• 18" rim steering wheel with beautiful chrome plated spokes.
• Includes quality chrome aluminum horn bezel and horn button.
• Solid heavy duty 40-spline hub with chrome plastic hub bezel.
• Special steering shaft nut also included.
• Install instructions included and available online as digital download.
• Warning: 2014 Peterbilt & Kenworth equipped with steering angle sensor & stability control require special installation. Consult installation instruction sheet to prevent vehicle damage.

• Glossy sticker for air valve knobs, sticker only.
• Available with tractor script.
• Beautiful chrome lettering with special clear resin top surface.

• High quality injection molded polycarbonate lens.
• Epoxy coated, fully sealed electronics.
• Energy efficient solid-state circuit board engineered for 12V DC systems.
• Feature 14 bright red LEDs.
• Easy wiring with 3 hardwired wire leads.
• Mounting holes approximately 11-7/16" apart.

• Beautiful chrome plated finish with triple chrome plating process.
• Quality plastic injection molded.
• Designed to cover up and hide the lug nut flange washer.
• Convenience pack, includes 10 nut covers

• High quality polycarbonate lens with epoxy sealed circuit board.
• Heavy duty chrome plated metal housing, with stud mounting.
• 12 volt, dual function with 3 wire hookup (ground wire with ring terminal).
• DOT/SAE, FMVSS 108.
• IP67 rated for dust and water protection

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• 19 bright LEDs with reflective inner housing.
• Fits Grakon 1000 style cab light housing and bezel.
• Proper installation requires use of OEM type rubber gasket.
• Hard wired with two 0.180" bullet plugs.

• Simulate the load of an incandescent bulb.
• Aluminum housing with heat sink allows installation in most locations.
• Eliminate hyper flashing, no flashing, or burnt out bulb indication associated with LED conversions.
• Includes one load resistor and 2 quick splice connectors.

• High quality injection molded polycarbonate lens.
• Epoxy coated, fully sealed electronics.
• Energy efficient solid-state circuit board engineered for 12V DC systems.
• Feature 19 bright amber LEDs.
• Easy wiring with 3 hardwired wire leads.
• Mounting holes approximately 11-7/16" apart.

• Beautiful chrome finish or premium automotive paint in vibrant colors, bold effects and dazzling color.
• Made of quality aluminum.
• Fits Freightliner, Kenworth, Peterbilt and various other trucks.
• Matching gearshift covers, gearshift knobs, shifter shaft extensions, and steering wheel spinners available

• Highly polished 304 premium grade stainless steel for durability and shine.
• Heavy duty internal spring design with quality 14 gauge material.
• Thick end plates with welded heavy duty mounting studs and matching fasteners.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Bright single function LEDs with reflective inner housing.
• Unique lens design with mirror maze effect.
• 12VDC, hard wired with two .180" bullet plugs.
• DOT/SAE, FMVSS 108.
• IP67 water resistant.

• 17 LED round reflector cab light with chrome plastic housing.
• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Complete LED Cab Light Kit.
• Amber Lens with Reflector Item # (39320B).
• Dual Function, Hard wired with three .180 bullet plugs.

• High quality chrome plated finish with triple chrome plating process.
• Fits various 2006 Peterbilt models.
• Fits 2-3/16" dia. gauges.
• Easy snap-on installation.

Highly polished 304 premium grade stainless steel for durability and shine.

Stainless steel low profile bezel for cab lights.

• High quality polycarbonate lens with epoxy sealed circuit board.
• Bright LEDs with reflective inner housing.
• 12V DC, hard wired with three .180" bullet plugs.
• DOT/SAE, FMVSS108.
• IP67 water resistant.

• Stainless steel rear axle/hub high hat only.
• Without beauty ring, for 2 piece rear axle kit.

• Polycarbonate lens sonically sealed to housing to prevent moisture intrusion.
• Bright single function LEDs with reflective inner housing.
• 12VDC, hard wired with two .180" bullet plugs.
• Amperage draw is about 0.07A at 12V DC.
• DOT/SAE FMVSS 108.
• IP67 water resistant.

• High quality steel with chrome plated spokes.
• Outer grip coated in premium automotive paint with vibrant candy pearl color.
• Steering wheel only. Hub and horn button assembly available separately.
• Mix and match with United Pacific hubs and designer horn bezels for a unique and distinctive look.

• Color: Red
• Perforated design help reduce palm perspiration.
• Engineered leather for long lasting look & feel.
• Large grip diameter reduces fatigue.
• Installation tips: Warm cover to room temperature in cold weather. Carefully stretch cover over the steering wheel.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Stainless steel Peterbilt front air cleaner bracket with 8X 17 LED lights.
• 17 amber LED with amber lens clear style with reflector light item #39320, dual function.

• Highly polished 430 stainless steel.
• Heavy duty internal spring design.
• Welded heavy duty mounting studs and matching fasteners.
• Each hanger features three laser cut openings for 4" round lights.
• 5/8"-11 UNC thread studs.

• Polycarbonate lens with fully sealed electronics.
• Heavy duty chrome plated metal housing with stud mounting.
• Unique bubble style front lens.
• 12VDC, 3-wire hookup.
• Wiring color code: White=Ground, Black=Low function, Red=High function.

• Beautiful chrome plated finish with triple chrome plating process.
• Fits 2006 Kenworth W900, T800, T660, and C500.
• Left dash (UP #41359) and right dash panel trim (UP# 41363) available separately.

• Highly polished 304 premium grade stainless steel for durability and shine.
• Center 2-1/4" diameter cutout.
• Ideal for mounting United Pacific 3" watermelon/torpedo lights.
• Can also mount 2" clearance/marker lights with a mounting grommet.