Grand General
- Fits Peterbilt year 2006 and later
- Sold by each
- Door grab handle with 2 screws
- Driver front - 24 amber-led/amber-lens, rear - 24 red-led/red-lens w/ 4 Amber LED side marker for ultimate visibility; Size 4.5" (l) x 2.5" (w) x 4.5" (H); single stud 1.5" (l); Double stud 1" (l)
- Waterproof design with sealed high impact lens and housing to prevent damage from moisture and corrosion
- Universal stud mount design with interchangeable 2-stud or single stud; easy 3-wire installation; 12 Volt; low ampere draw; high and low dual function; sold individually
Square Double Face Pearl LED Pedestal Light Driver Side Amber/Red with Clear Lens
- Clear Lens
- Side A: Amber LED
- Side B: Red LED
- Universal 1 stud / 2 studs mount
- Mounting hardware included for stud or bracket mount
- Chrome plastic housing, high heat acrylic lens
- Size 4.5" (L) x 2.5" (W) x 4.5" (H) Single stud 1.5" (L); Double stud 1" (L)
- Passenger front 24 Amber-LED/Amber-Lens, rear - 24 Red-LED/Red-Lens w/ 4 amber LED side marker for ultimate visibility; Size 4.5" (L) x 2.5" (W) x 4.5" (H); Single stud 1.5" (L); Double stud 1" (L)
- Waterproof design with sealed high impact lens and housing to prevent damage from moisture and corrosion
- Universal stud mount design with interchangeable 2-stud or single stud; easy 3-wire installation; 12 Volt; low ampere draw; high and low dual function; sold Individually
Square Double Face Pearl LED Pedestal Light Passenger Side Amber/Red with Clear Lens
- Clear Lens
- Side A: Amber LED
- Side B: Red LED
- Universal 1 stud / 2 studs mount
- Mounting hardware included for stud or bracket mount
- Chrome plastic housing, high heat acrylic lens
- Size 4.5" (L) x 2.5" (W) x 4.5" (H) Single stud 1.5" (L); Double stud 1" (L)
Amber/Clear Classic Watermelon 18 LED Dual Function Sealed Turn/Marker Light
- Amber LED
- Clear Lens
- Classic watermelon surface mount LED light turn/marker light
- 18 high power SMD LEDs of 12V
- Easy surface mount design, sealed polycarbonate lens
- Comes with 12" lead hardwired with three 0.180 bullet plugs for installation
Quarter Fender Pipe Plug
- Chrome Plated
- Fits 2" O.D. pipe
- Sold Individually
MUD FLAP HANGER PLUGS
- Material: Stainless Steel
- Fits: Spring loaded mud flap hangers
4″ PEARL LED LOAD LIGHT
- 4-1/8" Dia. x 7/8" (H)
- Polycarbonate lens, reflector and housing sonically sealed
- Fits OE stock load light housing behind cab/sleeper 3 mounting screw holes
- Green 24 LED's - 12V
- Green Lens
- Designed for interior or decorative use only
Single Headlight Bezel
Fits: Peterbilt & International single headlights
- Bulb: 3157 13 LED Bulb Amber- 12V
- Tower style
- Direct replacement
- 1 wire hole & 2 screw holes required
- Glass lens and stainless steel bezel
- Marker & Clearance Light
Stainless Steel Sleeper Louvred Vent Cover For Peterbilt
- 8 ⅞” (L) x 3 ⅝” (W)
- Fits: Peterbilt 359, 377 & 379
- Polished Mirror Shine Stainless Steel
- Adhesive tape on back (not included)
4" Flange Mount Light W/ Chrome Die Case Housing
Size: 5-5/16" dia. x 2-1/8" (H) Features: Replaceable bulbs, lens and chrome die cast housing Flush mount. Requires 4-1/2" dia. hole for mounting Material: Acrylic lens, metal housing with 2 wires and snap ring 2 wires in 18 Gauge, metal housing as ground Stop/Turn/Tail4" Prime Spyder Light Red
- 17 Red LEDs - 12V
- 4-5/16" Dia. x 1-1/8" (H)
- Sealed polycarbonate lens, reflector and housing
- Adapter plug (87368) included
- Stop/Turn/Tail
2-ply, carbonless, with 70 hour / 8 day and 60 hour / 7 day recap
31 sets of forms per book Includes these non-required items:
1) Total mileage today box
2) Home terminal address line
3) "From" and "To" lines
18" Black And Blue Leather Steering Wheel Cover
- Extra padding for added comfort Reinforced durable rubber lining grips onto the steering wheel and holds the cover in place Superior style and quality
- Easy slip-on
3 PIECE FRONT AXLE COVERS W/ STANDARD HUB CAP
- Fits 20", 22. 5" and 24. 5" wheels
- Wheel Type: Steel
- Ring Holes: 5 large/ 5 small
- Size 3-7/8" (H)
- Sold by each
- Heavy Duty Die-Cast
- 6 ”(L) x 1” (W) x 6 1/2” (H)
- Base has two stud mount with 1-5/8 inch center to center bolt spacing
Lighted Bumper Guides in Full Moon Style for Steel Bumper
- 2 1" dia. x 51" long pipe with threaded cap on top to hold acrylic plastic lens
- 4 chrome steel clamps
- 8 feet extension wire
- Stainless Steel
- Sold in Pairs
LED Pearl 6" Oval White Backup Light
- Oval Pearl White color LED light, with Clear lens; 24 LEDs of 12V
- Waterproof design with sealed high impact lens and housing to prevent damage from moisture and corrosion
- Wire connection- uses standard 3-prong pigtail, 3-prong pigtail GG 80472 included with kits
Red Oval Low Profile Spyder 20-LED Sealed Stop/Turn/Tail Light
- 6-1/2"(L) x 2-5/16"(W) x 1-1/2”(H)
- Sealed polycarbonate lens, reflector and housing
- Hardwired w/ 3 contact female plug
- 12V, 50 Watts
- Rainbow glass lens for mini fog light
- 12V/24V Solenoid Train Horn Valve
- Fits Grand General train horn (69991) & air horn (69988)
- Premium chrome plastic interior dash windshield vent with two openings
- For Freightliner Cascadia 2008 and later
- Easy installation with four screw holes to mount onto the surface
- Chrome plastic
- Chrome plastic interior dash windshield vent with one opening
- Fits Freightliner Cascadia 2008
- Made of Chrome plastic
2" Mini Visor Lip Up Small Bullet Marker Light
- Highly polished stainless steel
- Safety design with front lip turned under to prevent cuts on sharp edges
- No lip visor use between light & grommet
- Closed back water tight design help to prevent water damage
- Designed for Grand General LED lights
- Cold-resistant PVC with thermal plastic rubber (TPR)
13/16" Bullet Push On Plastic Nut Cover
- Across Flat: ¹³∕₁₆"
- Height: 1 ⅜”
- Lens Color: Red
- LED Color: Red
- Dimensions: 6” (L) x 1-5/16” (W) x 7/8” (H)
- Specially designed for trailer top rail
- Sealed polycarbonate lens, chrome reflector and housing
- Hardwired, 2 wires with ground ring wire
Surface mount
Front Stainless Steel Hub Cap With 5 Notch's
- Lip: 7/16"
- Notches: 5
- Clips: 5
1157 Purple Glass Bulb (Pair)
- 12V
- Bulb: 1157
- Glass Color: Purple
- Bulb Base: DC Index
- Amps: 2.10/0.59
11/16" Nut Cover Push On Acorn Die Cast
- Width 11/16" Across flat
- Height: 13/16"
1 1/4" Standard Push On Chrome Nut Cover with Flange
- 1-1/4"width (across flat)
- Height: 2"
4" Red/Clear Smart Dynamic LED Light
- 4-5/16" Dia. x 1-1/8" (H)
- 26 LEDs - 12V
- Built-in smart chip to sense turn or stop signal
Stop function: full lit (non-sequential)
Turn function: sequential - Sealed polycarbonate lens, reflector and housing
- Adapter plug (87368) included
- Clear Lens
- Red LED's
4" Pearl White LED Back Up Light with Die Cast Housing
- Chrome die cast housing with 3 mounting holes, acrylic lens
- Light hardwired w/ 2 prong plug
- 24 White LED's
- Clear Lens
- Length: 7"
- Black wire with ground ring
- 18GA UL Listed wires
- Across Flat Measurement: 1-1/2"
- Height: 2-7/16"
- Highly polished stainless steel
- Safety design with front lip turned under to prevent cuts on sharp edges
- No lip visor use between light & grommet
9/16" Chrome Standard Nut Cover
- Across Flat measurement: 9/16"
- Height: 11/16"
Sold in pairs
Voltage 12V
Type 1157 red glass light bulb
Keep aluminum wheel from magnetizing together
Ring Holes: 8 with 1" 25mm diameter
Thickness: 1/32" (1mm)
Color: Black
4" Amber/Clear Smart Dynamic LED Light
- 4-5/16" Dia. x 1-1/8" (H)
- 26 LEDs - 12V
- Built-in smart chip to sense turn or stop signal
Stop function: full lit (non-sequential)
Turn function: sequential - Sealed polycarbonate lens, reflector and housing
- Adapter plug (87368) included
- Amber LED's
- Clear Lens
- Direct replacement for Freightliner models
- Hardwired with two 0.180 bullet plugs
- 4-9/16"(L) x 2-1/4"(W) x 1-1/8"(H)
- 8 LEDs - 12V
- 18 super bright LEDs with Spyder design for superior light distribution
- High impact polycarbonate lens, housing and Spyder reflector are sealed to prevent damage from moisture and corrosion
- Wire connection: hardwired with a 3 contact female plug
- Function: Front/Park/Turn
- 18 super bright LEDs with Spyder design for superior light distribution
- High impact polycarbonate lens, housing and Spyder reflector are sealed to prevent damage from moisture and corrosion
- Wire connection: hardwired with a 3 contact female plug
- Function: Front/Park/Turn
Driver Daily Loose-Leaf Log with Detailed DVIR
- 8-1/2" (W) x 6-1/2" Overall Size
- Chrome straight grip with lines 13/18 speed gearshift knob, fits EF 13/18 speed
- No additional adapter, base or hardware needed
- One piece solid CNC machined aluminum
- Direct replacement, Re-use OEM/factory mounting hardware for installation