Material: Chrome Plastic

• Trailer hub cap clip set for newer/late models
• Special designed clip is used on Stemco axle cap to hold regular rear hub cap
• Hold 8" dia. hub cap (20020)
• Set of 3

Chrome front axle cover with 4 notches for newer steel and older aluminum wheels

• Lip: 7/16" 
• Notches: 4
• Clips: 4

Front chrome axle cover 8 23/32" 5 notch short lip hub cap. Fits Newer peterbilt/volvo/ford.

Includes clips for mounting.

• Fits 8-1/2" dia. axle, 8 of 5/8" studs, Also fits Peterbilt 1995 and later
• Size- 1" (H) side wall, Sold by each
• 8" I.D

• Chrome plated steel
• Fits Rear hub caps
• Cone shape
• 8-1/2" dia. axle, 8 of 5/8" studs, also fits "Peterbilt" 1995 up

Rear Axle Cover

• Chrome Plated Steel
• 8 1/2in chrome rear axle cover with 3/4 studs.
• 1 inch Side Walls

• ID: 7-1/4"
• Height: 2-3/4"
• 7-1/4" dia. axle, 12 of 1/2" studs

33mm Stainless Steel Push On Lug Nut Cover with Flange

Across Flat measurement: 33mm

Height: 2" 

Standard Push On Lug Nut Cover

• Width: 1 1/2" (across flat)
• Height: 1/12" 

• 8-1/4 inches length x 4 inches width x 1-3/4 inches diameter
• Fits standard 6.5 inches oval light with grommet (not included)
• Chrome plated durable steel

Flap weights: 24in chrome bottom flap weight with 3 holes--hardware included. Per each

BOTTOM MUD FLAP PLATE WITH 3 HOLES

• 11.5 Gauge - chrome steel 14 gauge
• Without Backing Plate
• Size: 4" X 24"
• SOLD BY EACH

• 3" x 18"
• 11.5 gauge - chrome steel 14 gauge
• Without Backing Plate
• Mounting hardware is included

• Made of 11.5 gauge chrome steel
• Mounting hardware included
• Bottom mud flap plate with 3 studs without backing plate

• 4 Studs on back
• 2" x 24"
• 11.5 gauge - chrome plated steel

• Stainless Steel
• 4" x 24"
• No backing plate

Bullet Push-On Lug Nut Cover without Flange

33MM Bullet Flange Lug Nut Cover

Material: Chrome plated steel

Height: 2-1/2"

6 notch fits at 4, 5, 6 notch hub cap, except all international 6 even notch hub caps

Chrome Plated

Sold by Each

Width: 24" 

Height: 21" 

Sold by Each

Width: 24" 

Height: 18" 

Material: Chrome Plated Steel

Set Contains: 

3 - "U" Bolts

3 - Backing plates

3 - Rubber washers

6 - Washers

6 - Nuts

Door Mount L bracket for mirrors

3-5/16 X 1-1/2 X 1-1/4 Inches Stainless Steel L Bracket for Mirror

• Stainless Steel 6" Convex blind spot mirror with center mount for trucks, buses, utility vehicles and more
• The round Convex mirror helps to improve visibility and eliminate blind spots
• Built with high quality Stainless Steel housing
• 5/16" Female adjustable ball stud for view angle rearrangement and the heavy duty "l-shape" bracket for easy installation

• Material: Stainless Steel
• Overall dimension: 1-5/8 inch side x 2-1/4 inch height x 1-1/4 inch side; 1-1/4 inch width
• Slots: 1-5/8 inch side has 5/8 inch x 1/2 inch slot; 1-1/4 inch side has 5/8 inch x 3/8 inch slot

Removable Cap only for the Standard Axle Covers

1 pc. removable cap (40139)

• Material: Chrome Plastic
• Fits: Most trucks with 33mm Lug Nuts
• Screw On 
• Hex Flat Top

• Stainless steel, universal standard front hub caps
• Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole. 6 notch fits all 4, 5, 6 even and 6 uneven
• 5/8 inch lip fits both steel and aluminum wheel
• 2 inch high; 6 clips included
• Sold by each

• Chrome plated steel, universal front hub cap in cone shape
• Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
• 6 notch fits all 4, 5, and 6 uneven notch hubs
• 1 inch long lip for aluminum
• Size- 3" (H); Sold by each

• For wheel with 8-23/32" dia. center hole
• Sold by each

Universal Front Hub Cap in Cove Shape

Lip: 7/16"

Notches: 6

Clips: 4

3" High

Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
6 notch fits all 4, 5, and 6 uneven notch hubs

Driver Vehicle Inspection with Carbon

8-1/2" (W) x 5-1/2" (L) Overall Size

‧Helps satisfy DOT vehicle inspection regulations - §396.11 and §396.13 ‧Take the worry out of complying with DOT inspection regulations. ‧Detailed DVIR's list specific tractor and trailer parts to help simplify inspection. Drivers simply check off part that need repair. Book formats include key regulations printed on inside front cover to remind drivers of DOT - required procedures. ‧2-ply, book format ‧31 sets of forms per book

Stainless Steel Flange Mount Bezel with GG Watermelon Light Mount Holes

• 430 grade stainless steel bezel
• Fits standard 4-3/8" diameter hole

High polished, show quality, durable, stainless steel flange mount bezels—no more loose pieces and rattling! Drivers can now ride in style with the convenience of easily installing our line of watermelon lights onto any standard 4-3/8" dia hole, avoiding an otherwise puzzling and tough installation process. Perfect for rear of cab, center panels, or light bars. Order with us today!

4 inch Red Plastic Lens

3 Screw Plastic Lens-Red

• Flush Mount Kit
• No Lens (sold separately) 
• 1 Wire