Grand General
- 1" long lip for aluminum wheel with 8-1/2" dia. center hole
- Fits Kenworth & Freightliner 1996
Material | Chrome plated steel |
Fits | GMC Top Kick Medium Duty Truck |
Part No. | Across Flat | Height |
10411 | 30mm | 2" |
Lugnut covers body/frame: 1" standard chrome bolt cover. Used on many frame bolts.
Material: Chrome Plated Steel
1" Wide
1-1/4" Tall
Fits 0.180 male bullet
Sold by the plug (~12")
Front chrome axle cover 8 23/32" 5 notch short lip hub cap. Fits Newer peterbilt/volvo/ford.
Includes clips for mounting.
- Fits 8-1/2" dia. axle, 8 of 5/8" studs, Also fits Peterbilt 1995 and later
- Size- 1" (H) side wall, Sold by each
- 8" I.D
Material | Chrome Plastic |
Features | With flange |
Across Flat | Height | Application |
33mm | 3-3/8" | Push-on |
Glass Flush Mount 1 Wire Dark Amber Watermelon Light
For all purposes, increases your driving visibility 1 wire hole & 2 screw holes required |
- Dark Amber Glass Lens
- Sold Individually
- Glass lens
- Stainless steel bezel
- Function: Marker & Clearance
- Chrome twist, lock & go bezel
- Easy one piece installation, No grommet needed
- Low profile 4" round LED
- 18 Red LED - 12V
- Clear Lens
Light for 91300 Bar (See related products)
- 18 Red High Power LED - 12V
- 5-3/4" Dia. x 1-1/2" (H)
- Chrome twist, lock & go bezel
- Easy one piece installation, do not need grommet
- Sealed polycarbonate red lens, housing, black flange and chrome plastic bezel
- Surface mount
- Uses standard 3-prong pigtail
- 8 LEDs - 12V
- Bulb Type: 211-2
- Dome type, 44mm/1.72"
- Direct replacement
Chrome Aluminum ball with zinc-plated base & clamp
Heavy duty bearing
Chrome front axle cover with 4 notches for newer steel and older aluminum wheels
- Lip: 7/16"
- Notches: 4
- Clips: 4
- Size 1-13/16" (H)
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" diameter center hole
- 7/16" short lip for steel wheel
- 4 Notches
- 4 Clips
- Chrome plated steel
- Fits Rear hub caps
- Cone shape
- 8-1/2" dia. axle, 8 of 5/8" studs, also fits "Peterbilt" 1995 up
Rear Axle Cover
- Chrome Plated Steel
- 8 1/2in chrome rear axle cover with 3/4 studs.
- 1 inch Side Walls
Rear Axle Cover
- Stainless Steel
- 8 1/2in chrome rear axle cover with 3/4 studs.
- 1 inch Side Walls
- ID: 7-1/4"
- Height: 2-3/4"
- 7-1/4" dia. axle, 12 of 1/2" studs
Standard Push On Lug Nut Cover
- Width: 1 1/2" (across flat)
- Height: 1/12"
Stainless steel horn cover 4 welded snap-in clips for mounting fits 4 5/8" x 7 3/8" horn bell (Fits Grover rectangular air horns)
Chrome steel horn cover: round horn cover for 7.25 inch to 7.5 inch round bell. (measure outside diameter of trumpet to determine correct size.) Mounts with 4 welded on spring clips.
- 8-1/4 inches length x 4 inches width x 1-3/4 inches diameter
- Fits standard 6.5 inches oval light with grommet (not included)
- Chrome plated durable steel
Flap weights: 24in chrome bottom flap weight with 3 holes--hardware included. Per each
BOTTOM MUD FLAP PLATE WITH 3 HOLES
- 11.5 Gauge - chrome steel 14 gauge
- Without Backing Plate
- Size: 4" X 24"
- SOLD BY EACH
- Made of 11.5 gauge chrome steel
- Mounting hardware included
- Bottom mud flap plate with 3 studs without backing plate
- Stainless Steel
- 4" x 24"
- No backing plate
Material | Chrome Plastic |
Features | With flange |
Part No. | Across Flat | Height | Application |
10282 | 1-1/2" | 3-3/8" | Push-on |
Bullet Push-On Lug Nut Cover without Flange
Material | Chrome Plastic |
Fits | For most trucks |
Features | Without flange |
6 notch fits at 4, 5, 6 notch hub cap, except all international 6 even notch hub caps
Chrome Plated
Fits 1" long lip |
For wheel with 8-23/32" dia. center hole |
Sold by Each
- 14 gauge stainless steel
- Mounting hardware included
- Bottom mud flap plate with 3 studs
- Sold by each
5/16" Dia. Chrome Steel |
Sold by Each
Width: 24"
Height: 18"
- Stainless Steel 6" Convex blind spot mirror with center mount for trucks, buses, utility vehicles and more
- The round Convex mirror helps to improve visibility and eliminate blind spots
- Built with high quality Stainless Steel housing
- 5/16" Female adjustable ball stud for view angle rearrangement and the heavy duty "l-shape" bracket for easy installation
Part No. | Across Flat | Height |
10269 | 33mm | 3-1/8" |
Concealing your open lug nuts with Grand General's lug nut covers is the easiest and most cost effective way to dramatically change the look of your vehicle. Our wide selection of covers come in many different designs to cater to the OEM look or an aggressive aftermarket style. Made from high quality ABS plastic for a true and secure fit.
Material: Chrome Plastic
33MM across flat
3" Height
For plastic axle cover and multi-purpose; without stainless steel clip |
Part No. | Across Flat | Height | Application |
10287 | 1-1/2" | 2-1/2" | Push-on |
Material: Chrome Plastic
- Stainless steel, universal standard front hub caps
- Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole. 6 notch fits all 4, 5, 6 even and 6 uneven
- 5/8 inch lip fits both steel and aluminum wheel
- 2 inch high; 6 clips included
- Sold by each
- For wheel with 8-23/32" dia. center hole
- Sold by each
- For wheel with 8-23/32" dia. center hole
- Sold by each
- Hardware included
- Width: 24"
- Height 2"
- Material: 14 gauge - stainless steel
- 4 Studs on back
Universal Front Hub Cap in Cove Shape
Lip: 7/16"
Notches: 6
Clips: 4
3" High
Fits 20", 22.5" and 24.5" wheel with 8-23/32" dia. center hole
6 notch fits all 4, 5, and 6 uneven notch hubs
Stainless Steel Flange Mount Bezel with GG Watermelon Light Mount Holes
- 430 grade stainless steel bezel
- Fits standard 4-3/8" diameter hole
High polished, show quality, durable, stainless steel flange mount bezels—no more loose pieces and rattling! Drivers can now ride in style with the convenience of easily installing our line of watermelon lights onto any standard 4-3/8" dia hole, avoiding an otherwise puzzling and tough installation process. Perfect for rear of cab, center panels, or light bars. Order with us today!